Doctor Jason Jiang

Doctor Jason Jiang

Research Fellow,
Centre for Infrastructure Engineering

Biography

Dr. Jiang joined Western Sydney University in 2021 and is currently an ARC DECRA Fellow in the Centre for Infrastructure Engineering. He obtained his Bachelor's degree from Southeast University in 2011 and his Ph. D. degree from City University of Hong Kong in 2017.  He did his postdoctoral research at The Hong Kong Polytechnic University. Before joining WSU, he held the position of JSPS International Fellow at The University of Tokyo in Japan.

This information has been contributed by Doctor Jiang.

Qualifications

  • PhD City University of Hong Kong

Awards

  • Discovery Early Career Researcher Award (DECRA) 2021-01-01

Interests

  • Composite materials and structures

Organisational Unit (School / Division)

  • Centre for Infrastructure Engineering

Contact

Email: Cheng.Jiang@westernsydney.edu.au
Phone:
Mobile:
Location:

PLEASE NOTE: obtaining information from this Directory must be for the legitimate purposes of doing business with and within Western Sydney University, and must not be used for unsolicited bulk e-mailing (spamming) or similar purposes.

Publications

Journal Articles

  • Liu, K., Jiang, C., Yu, T. and Teng, J. (2023), 'Compressive behaviour of elliptical FRP tube-confined concrete columns', Composite Structures, vol 303 .
  • Tian, H., Zhou, Z., Li, B. and Jiang, C. (2023), 'Effect of strain gradient on the stress-strain relationship of FRP-confined ultra-high performance concrete', Composite Structures, vol 304, no Part 2 .
  • Jiang, C. (2023), 'Strength enhancement due to FRP confinement for coarse aggregate-free concretes', Engineering Structures, vol 277 .
  • Cao, Y., Zhao, G., Liu, M., Jin, Q., Tao, Z. and Jiang, C. (2023), 'FRP-confined rubber concrete with effect of strain rate : tests and analysis-oriented stress-strain model', Construction and Building Materials, vol 366 .
  • Jiang, C., Avadh, K. and Nagai, K. (2023), 'A mesoscale simulation of the FRP-to-concrete interfacial debonding propagation process by 3D RBSM', Composite Structures, vol 304, no 2 .
  • Lin, H., Zeng, H., Feng, P., Jiang, C. and Zhang, Y. (2023), 'Bond behavior of FRP-concrete wet-bonding interface under lateral confinement', Engineering Structures, vol 292 .
  • Tijani, I., Jiang, C., Lim, C. and Wu, Y. (2022), 'Eccentrically loaded concrete under nonuniform passive confinement', Journal of Structural Engineering, vol 148, no 1 .
  • Liao, J., Zeng, J., Jiang, C., Li, J. and Yuan, J. (2022), 'Stress-strain behavior and design-oriented model for FRP spiral strip-confined concrete', Composite Structures, vol 293 .
  • Cao, Y., Zhang, Y., Liu, M., Lu, Z. and Jiang, C. (2021), 'Analysis-oriented stress-strain model for FRP-confined predamaged concrete', Journal of Building Engineering, vol 36 .
  • Jiang, C., Lai, W., Sham, J. and Lin, G. (2021), 'Preliminary investigation of an approach to improve water impermeability in concrete with externally bonded FRP systems', Journal of Composites for Construction, vol 25, no 6 .
  • Jiang, C., Yu, Q. and Gu, X. (2021), 'A unified bond-slip model for the interface between FRP and steel', Composites Part B: Engineering, vol 227 .
  • Guan, D., Liu, J., Jiang, C., Chen, Z. and Guo, Z. (2021), 'Shear behaviour of the UHPC-NSC interface with castellated keys : effects of castellated key dimension and dowel rebar', Structures, vol 31 , pp 172 - 181.
  • Cao, Y., Hou, C., Liu, M. and Jiang, C. (2021), 'Effects of predamage and load cyclic on compression behavior of fiber reinforced polymer-confined concrete', Structural Concrete, vol 22, no 3 , pp 1784 - 1799.
  • Tijani, I., Jiang, C., Lim, C. and Wu, Y. (2020), 'Effect of load eccentricity on the mechanical response of FRP-confined predamaged concrete under compression', Journal of Composites for Construction, vol 24, no 5 .
  • Jiang, C. and Wu, Y. (2020), 'Axial strength of eccentrically loaded FRP-confined short concrete columns', Polymers, vol 12, no 6 .
  • Zeng, J., Ye, Y., Guo, Y., Lv, J., Ouyang, Y. and Jiang, C. (2020), 'PET FRP-concrete-high strength steel hybrid solid columns with strain-hardening and ductile performance : cyclic axial compressive behavior', Composites Part B: Engineering, vol 190 .
  • Lin, H., Zhao, Y., Feng, P., Ye, H., Ozbolt, J., Jiang, C. and Yang, J. (2019), 'State-of-the-art review on the bond properties of corroded reinforcing steel bar', Construction and Building Materials, vol 213 , pp 216 - 233.
  • Yu, Q., Gu, X., Zhao, X., Zhang, D., Huang, H. and Jiang, C. (2019), 'Characterization of model uncertainty of adhesively bonded CFRP-to-steel joints', Composite Structures, vol 215 , pp 150 - 165.
  • Wei, Y., Jiang, C. and Wu, Y. (2019), 'Confinement effectiveness of circular concrete-filled steel tubular columns under axial compression', Journal of Constructional Steel Research, vol 158 , pp 15 - 27.
  • Jiang, J., Jiang, C., Li, B. and Feng, P. (2019), 'Bond behavior of basalt textile meshes in ultra-high ductility cementitious composites', Composites Part B: Engineering, vol 174 .
  • Guan, D., Guo, Z., Jiang, C., Yang, S. and Yang, H. (2019), 'Experimental evaluation of precast concrete beam-column connections with high-strength steel rebars', KSCE Journal of Civil Engineering, vol 23, no 1 , pp 238 - 250.
  • Jiang, C., Yuan, F., Wu, Y. and Zhao, X. (2019), 'Effect of interfacial bond on plastic hinge length of FRP-confined RC columns', Journal of Composites for Construction, vol 23, no 2 .
  • Lin, H., Zhao, Y., Ozbolt, J., Feng, P., Jiang, C. and Eligehausen, R. (2019), 'Analytical model for the bond stress-slip relationship of deformed bars in normal strength concrete', Construction and Building Materials, vol 198 , pp 570 - 586.
  • Jiang, C., Wan, B., Wu, Y. and Omboko, J. (2018), 'Epoxy interlocking : a novel approach to enhance FRP-to-concrete bond behavior', Construction and Building Materials, vol 193 , pp 643 - 653.
  • Cao, Y., Wu, Y. and Jiang, C. (2018), 'Stress-strain relationship of FRP confined concrete columns under combined axial load and bending moment', Composites Part B: Engineering, vol 134 , pp 207 - 217.
  • Hu, Y., Guo, W., Jiang, C., Zhou, Y. and Zhu, W. (2018), 'Looseness localization for bolted joints using Bayesian operational modal analysis and modal strain energy', Advances in Mechanical Engineering, vol 10, no 11 , pp 1 - 10.
  • Hu, Y., Zhou, H., Zhu, W. and Jiang, C. (2018), 'Large deformation analysis of composite spatial curved beams with arbitrary undeformed configurations described by Euler angles with discontinuities and singularities', Computers and Structures, vol 210 , pp 122 - 134.
  • Jiang, C., Wu, Y. and Dai, M. (2018), 'Degradation of steel-to-concrete bond due to corrosion', Construction and Building Materials, vol 158 , pp 1073 - 1080.
  • Wan, B., Jiang, C. and Wu, Y. (2018), 'Effect of defects in externally bonded FRP reinforced concrete', Construction and Building Materials, vol 172 , pp 63 - 76.
  • Gong, J., Zou, X., Shi, H., Jiang, C. and Li, Z. (2018), 'Numerical investigation of the nonlinear composite action of FRP-concrete hybrid beams/decks', Applied Sciences, vol 8, no 11 .
  • Guan, D., Jiang, C., Guo, Z. and Ge, H. (2018), 'Development and seismic behavior of precast concrete beam-to-column connections', Journal of Earthquake Engineering, vol 22, no 2 , pp 234 - 256.
  • Hu, Y., Jiang, C., Liu, W., Yu, Q. and Zhou, Y. (2018), 'Degradation of the in-plane shear modulus of structural BFRP laminates due to high temperatures', Sensors, vol 18, no 10 .
  • Zhang, D., Gu, X., Yu, Q., Huang, H., Wan, B. and Jiang, C. (2018), 'Fully probabilistic analysis of FRP-to-concrete bonded joints considering model uncertainty', Composite Structures, vol 185 , pp 786 - 806.
  • Liu, W., Zhu, X., Zhou, Y., Mei, L., Meng, X. and Jiang, C. (2018), 'The ROP mechanism study in hard formation drilling using local impact method', Structural Engineering and Mechanics, vol 68, no 1 , pp 95 - 101.
  • Hu, Y., Liu, M., Zhu, W. and Jiang, C. (2017), 'An adaptive differential quadrature element method for large deformation contact problems involving curved beams with a finite number of contact points', International Journal of Solids and Structures, vol 115-116 , pp 200 - 207.
  • Jiang, C., Wu, Y. and Jiang, J. (2017), 'Effect of aggregate size on stress-strain behaviour of concrete confined by fiber composites', Composite Structures, vol 168 , pp 851 - 862.
  • Cao, Y., Jiang, C. and Wu, Y. (2016), 'Cross-sectional unification on the stress-strain model of concrete subjected to high passive confinement by fiber-reinforced polymer', Polymers, vol 8, no 5 .

Conference Papers

  • Jiang, C., Wan, B. and Omboko, J. (2018), 'Enhancing FRP-to-concrete bond behavior by epoxy ribs', International Symposium on Fiber-Reinforced Polymer Reinforcement for Concrete Structures, Anaheim, Calif..
  • Yu, Q., Zhang, D., Wan, B., Gu, X. and Jiang, C. (2017), 'Model uncertainty of externally bonded FRP-to-concrete joints', Asia-Pacific Conference on FRP in Structures, Singapore.
  • Jiang, C., Wan, B. and Wu, Y. (2017), 'Effects of existing cracks on FRP-to-concrete interfacial behavior', Asia-Pacific Conference on FRP in Structures, Singapore.
  • Jiang, C. and Wu, Y. (2016), 'Effect of aggregate size on concrete behaviour under lateral confinement : test', International Conference on FRP Composites in Civil Engineering, Hong Kong, China.

Dr. Jiang has a research background in the areas of construction materials, FRP composite structures and structural fire engineering. He has in excess of 60 publications (including one book, and 35 SCI-indexed journal papers ) with an h-index of 19. A complete list of his journal papers can be found on Google Scholar. Dr. Jiang has received numerous awards and prizes for his contributions to the research and application of composite structures, including DECRA Fellowship and JSPS Fellowship. He has been successful in attracting competitive research grants both in Australia and other countries. 

This information has been contributed by Doctor Jiang.

Current Projects

Title: Reusable Fire-Resistant Column Rehabilitation Scheme for FRP Composites Estimated [Project for Cheng Jiang]
Funder:
  • Australian Research Council (ACRG)
Western Researchers: Zhong Tao and Jason Jiang
Years: 2021-09-27 - 2024-11-21
ID: P00026582

Western Sydney University

Locked Bag 1797
Penrith NSW 2751

ABN 53 014 069 881
CRICOS Provider No: 00917k