| Journal |
Magnetostriction-induced stress in an orthotropic mechanical thin high-Temperature superconducting disk based on the exponential model of critical state |
Wang K, Wang B |
Modern Physics Letters B |
| Journal |
Wear characteristics of cutting tool in brittle removal of a ductile meta in high-speed machining |
Su G, Wang Y, Han Z, Zhang P, Zhang H, Wang B, Liu Z |
Symmetry |
| Journal |
Is there only one equilibrium configuration for spontaneous bending of liquid crystal elastomer circular plates with free edges? |
Wang K, Wang B |
European Physical Journal E |
| Journal |
Analysis of static extension of piezoelectric semiconductor nanowires considering non-uniform strain and flexoelectric effects |
Ren C, Wang K, Wang B |
EPL |
| Journal |
RCN1 induces sorafenib resistance and malignancy in hepatocellular carcinoma by activating c-MYC signaling via the IRE1a-XBP1s pathway |
Wang J, Ma L, Liang Y, Yang X, Wei S, Peng H, Qiu S, Lu X, Zhu Y, Wang B |
Cell Death Discovery |
| Journal |
The electronic, adsorption, and catalytic properties of Bi-, Sb-, and As-nanoclusters |
Abdelsalam H, Teleb N, Wang B, Yunoki S, Zhang Q |
Catalysis Today |
| Journal |
Mechanical design and analytic solution for unfolding deformation of locomotive ferromagnetic robots |
Yan Z, Wang K, Wang B |
International Journal of Mechanical Sciences |
| Journal |
Fast and accurate performance prediction and optimization of thermoelectric generators with deep neural networks |
Wang P, Wang K, Xi L, Gao R, Wang B |
Advanced Materials Technologies |
| Journal |
Origin of magnetic relaxation barriers in a family of cobalt(II)-radical single-chain magnets : density functional theory and Ab initio calculations |
Lu F, Li J, Guo W, Wang B, Zhang Y |
Inorganic Chemistry |
| Journal |
Lightweight low-frequency sound-absorbing composites of graphene network reinforced by honeycomb structure |
Xu F, Zhang S, Wang G, Zhao D, Feng J, Wang B, He X |
Advanced Materials Interfaces |
| Journal |
Enhanced fatigue performance of auxetic honeycomb/substrate structures under thermal cycling |
Hu J, Wang B |
International Journal of Mechanical Sciences |
| Journal |
Improving thermomechanical properties of cracked brittle honeycombs by negative Poisson's ratio effect |
Li Z, Wang B, Wang K, Zheng L |
Composite Structures |
| Journal |
Indentation resistance of brittle auxetic structures : combining discrete representation and continuum model |
Li Z, Wang K, Wang B |
Engineering Fracture Mechanics |
| Journal |
Waterproof, breathable and washable triboelectric nanogenerator based on electrospun nanofiber films for wearable electronics |
Sun N, Wang G, Zhao H, Cai Y, Li J, Li G, Zhang X, Wang B, Han J, Wang Y, Yang Y |
Nano Energy |
| Journal |
Crack growth behavior and thermal shock resistance of ceramic sandwich structures with an auxetic honeycomb core |
Hu J, Wang B |
Composite Structures |
| Journal |
Isogeometric analysis of bending, vibration, and buckling behaviors of multilayered microplates based on the non-classical refined shear deformation theory |
Liu S, Wang K, Wang B, Li J, Zhang C |
Acta Mechanica |
| Journal |
Effects of non-Fourier heat conduction and surface heating rate on thermoelastic waves in semi-infinite ceramics subject to thermal shock |
Guo S, Zhang Y, Wang K, Wang B, Zhang C |
Ceramics International |
| Journal |
Mechanism of crack initiation and propagation of re-entrant auxetic honeycombs under thermal shock |
Li Z, Wang B, Wang K |
Journal of Applied Mechanics |
| Journal |
Size effect on the punch performance of brittle porous ceramics : theoretical analysis and numerical simulation |
Li Z, Wang K, Wang B, Li J |
International Journal of Mechanical Sciences |
| Journal |
Degeneration of power output of a flexible and wearable thermoelectric module under bending fatigue |
Wu Z, Wang B, Hou S, Zheng L |
Mechanics of Materials |
| Journal |
Analysis of piezoelectric PN homojunction and heterojunction considering flexoelectric effect and strain gradient |
Ren C, Wang K, Wang B |
Journal of Physics D: Applied Physics |
| Journal |
Sunlight irradiation and wind effect on the interlaminar stresses of the organic solar cell |
Liu S, Wang K, Wang B, Li J, Zhang C |
Archive of Applied Mechanics |
| Journal |
Bending behavior and its effect on switching performance of an all-optical switch |
Wang K, Wang B, Zheng L, Zhang Y, Zhang C |
Journal of Physics D: Applied Physics |
| Journal |
Energy conversion performance optimization and strength evaluation of a wearable thermoelectric generator made of a thermoelectric layer on a flexible substrate |
Cui Y, Wang B, Wang K |
Energy |
| Journal |
Non-Fourier thermal shock resistance and transient thermal fracture of magneto-electro-elastic composite with a penny-shaped crack |
Chang D, Wang B, Liu X, Wang T, Jin G, Han J |
Engineering Fracture Mechanics |
| Journal |
An analytical model for performance prediction and optimization of thermoelectric generators with varied leg cross-sections |
Wang P, Wang B, Wang K, Gao R, Xi L |
International Journal of Heat and Mass Transfer |
| Journal |
Effective behaviors of anisotropic thermoelectric composites containing ellipsoidal inclusions |
Wang P, Wang B, Wang K, Xi L |
Composite Structures |
| Journal |
Scale effect on the nonlinear vibration of piezoelectric sandwich nanobeams on Winkler foundation |
Luo T, Mao Q, Zeng S, Wang K, Wang B, Wu J, Lu Z |
Journal of Vibration Engineering and Technologies |
| Journal |
Analyzing size effects in a cracked orthotropic layer under antiplane shear loading |
Joseph R, Zhang C, Wang B, Samali B, Goh K, Purbolaksono J |
Archive of Applied Mechanics |
| Journal |
Investigation on springback behaviours of hexagonal close-packed sheet metals |
Mehrabi H, Yang C, Wang B |
Applied Mathematical Modelling |
| Journal |
A theoretical model for wearable thermoelectric generators considering the effect of human skin |
Zhang A, Li G, Wang B, Wang J |
Journal of Electronic Materials |
| Journal |
Shear behaviour and design of cold-formed ferritic stainless steel channels with circular web openings |
Yousefi A, Samali B, Yu Y |
Structures |
| Journal |
Silicate impurities incorporation in calcium aluminate cement concrete : mechanical and microstructural assessment |
Abolhasani A, Aslani F, Samali B, Ghaffar S, Fallahnejad H, Banihashemi S |
Advances in Applied Ceramics |
| Journal |
Fresh, mechanical, and durability properties of self-compacting mortar incorporating alumina nanoparticles and rice husk ash |
Mehdizadeh B, Jahandari S, Vessalas K, Miraki H, Rasekh H, Samali B |
Materials |
| Journal |
[In Press] Optimum external shading system for counterbalancing glare probability and daylight illuminance in Sydney's residential buildings |
Sorooshnia E, Rashidi M, Rahnamayiezekavat P, Rezaei F, Samali B |
Engineering, Construction and Architectural Management |
| Journal |
Numerical and experimental investigations of a thermal break composite façade mullion under four-point bending |
Huang S, Samali B, Li J |
Journal of Building Engineering |
| Journal |
Quality evaluation of digital twins generated based on UAV photogrammetry and TLS : bridge case study |
Mohammadi M, Rashidi M, Mousavi V, Karami A, Yu Y, Samali B |
Remote Sensing |
| Journal |
Experimental and numerical investigation of an innovative method for strengthening cold-formed steel profiles in bending throughout finite element modeling and application of neural network based on feature selection method |
Taheri E, Esgandarzadeh Fard S, Zandi Y, Samali B |
Applied Sciences |
| Journal |
Structural performance and sustainability assessment of hybrid-cold formed modular steel frame |
Usefi N, Sharafi P, Mortazavi M, Ronagh H, Samali B |
Journal of Building Engineering |
| Journal |
Physicochemical, mineralogical, and mechanical properties of calcium aluminate cement concrete exposed to elevated temperatures |
Abolhasani A, Samali B, Aslani F |
Materials |
| Journal |
Computational simulation of light timber framing connections strengthened with self-tapping screws |
Kildashti K, Alinoori F, Moshiri F, Samali B |
Journal of Building Engineering |
| Journal |
Comprehensive study of moving load identification on bridge structures using the explicit form of Newmark-B method : numerical and experimental studies |
Pourzeynali S, Zhu X, Ghari Zadeh A, Rashidi M, Samali B |
Remote Sensing |
| Journal |
Buckling behavior of non-retrofitted and FRP-retrofitted steel CHS T-joints |
Yazdi A, Rashidi M, Alembagheri M, Samali B |
Applied Sciences |
| Journal |
Shake table testing of standard cold-formed steel storage rack |
Firouzianhaji A, Usefi N, Samali B, Mehrabi P |
Applied Sciences |
| Journal |
Numerical analysis of axial cyclic behavior of FRP retrofitted CHS joints |
Alembagheri M, Rashidi M, Yazdi A, Samali B |
Materials |
| Journal |
Computational simulation of eccentrically loaded reinforced concrete walls formed with modular thin-walled permanent formwork system |
Kildashti K, Samali B, Malik A, Alamdari M |
Journal of Building Engineering |
| Journal |
Multi-image-feature-based hierarchical concrete crack identification framework using optimized SVM multi-classifiers and D-S fusion algorithm for bridge structures |
Yu Y, Rashidi M, Samali B, Yousefi A, Wang W |
Remote Sensing |
| Journal |
Punching behaviour of foam filled modular sandwich panels with high-density polyethylene skins |
Tahmoorian F, Nemati S, Sharafi P, Samali B, Khakpour S |
Journal of Building Engineering |
| Journal |
A comprehensive taxonomy for structure and material deficiencies, preventions and remedies of timber bridges |
Rashidi M, Noori Hoshyar A, Smith L, Samali B, Siddique R |
Journal of Building Engineering |
| Journal |
Experimental and numerical investigation on the complex behaviour of the localised seismic response in a multi-storey plan-asymmetric structure |
Alam Z, Sun L, Zhang C, Su Z, Samali B |
Structure and Infrastructure Engineering |
| Conference |
Computer vision-based classification of cracks on concrete bridges using machine learning techniques |
Yu Y, Rashidi M, Samali B, Mohammadi M, Nguyen A |
Proceedings of the 10th International Conference on Structural Health Monitoring of Intelligent Infrastructure (SHMII), Porto, Portugal, 30 June - 2 July 2021 |
| Conference |
Case study on accuracy comparison of digital twins developed for a heritage bridge via UAV photogrammetry and terrestrial laser scanning |
Mohammadi M, Rashidi M, Mousavi V, Karami A, Yu Y, Samali B |
Proceedings of the 10th International Conference on Structural Health Monitoring of Intelligent Infrastructure (SHMII), Porto, Portugal, 30 June - 2 July 2021 |
| Journal |
Effects of predamage and load cyclic on compression behavior of fiber reinforced polymer-confined concrete |
Cao Y, Hou C, Liu M, Jiang C |
Structural Concrete |
| Journal |
Shear behaviour of the UHPC-NSC interface with castellated keys : effects of castellated key dimension and dowel rebar |
Guan D, Liu J, Jiang C, Chen Z, Guo Z |
Structures |
| Journal |
A unified bond-slip model for the interface between FRP and steel |
Jiang C, Yu Q, Gu X |
Composites Part B: Engineering |
| Journal |
Preliminary investigation of an approach to improve water impermeability in concrete with externally bonded FRP systems |
Jiang C, Lai W, Sham J, Lin G |
Journal of Composites for Construction |
| Journal |
Analysis-oriented stress-strain model for FRP-confined predamaged concrete |
Cao Y, Zhang Y, Liu M, Lu Z, Jiang C |
Journal of Building Engineering |
| Journal |
Robustness of multistory corner-supported modular steel frames against progressive collapse |
Alembagheri M, Sharafi P, Tao Z, Hajirezaei R, Kildashti K |
Structural Design of Tall and Special Buildings |
| Journal |
Gravity-induced progressive collapse response of precast corner-supported modular buildings |
Sharafi P, Alembagheri M, Kildashti K, Ganji H |
Journal of Architectural Engineering |
| Journal |
Transmissibility performance assessment for drive-by bridge inspection |
Alamdari M, Kaichun C, Kim C, Kildashti K, Kalhori H |
Engineering Structures |
| Journal |
The influence of inter-module connections on the effective length of columns in multi-story modular steel frames |
Farajian M, Sharafi P, Kildashti K |
Journal of Constructional Steel Research |
| Book |
Proceedings for the Fifth Australasian Conference on Computational Mechanics (ACCM 2021), Western Sydney University, Sydney, Australia, 13 - 15 December 2021 |
Zhang Y, Zhang Z, Dong K, Yu Y, Xiang Y, Yang C |
Recent Advances in Computational Methods and Applications |
| Journal |
Atomic structure evolutions and mechanisms of the crystallization pathway of liquid Al during rapid cooling |
Zhou L, Pan J, Lang L, Tian Z, Mo Y, Dong K |
RSC Advances |
| Journal |
Numerical study of nanoscale and microscale particle transport in realistic lung models with and without stenosis |
Rahman M, Zhao M, Islam M, Dong K, Saha S |
International Journal of Multiphase Flow |
| Journal |
Effect of building cross-section shape on air pollutant dispersion around buildings |
Keshavarzian E, Jin R, Dong K, Kwok K |
Building and Environment |
| Journal |
The topologically close-packed Fe70Cu15Ni15 nanoparticles : a simulation study |
Li X, Tian Z, Xie Q, Dong K |
Vacuum |
| Journal |
Three-dimensional topological structures and formation processes of dislocations in Au nanowire under tension loading |
Hou Z, Li C, Liu L, Gao Q, Wang J, Liu R, Tian Z, Dong K |
Computational Materials Science |
| Journal |
Aerosol particle transport and deposition in upper and lower airways of infant, child and adult human lungs |
Rahman M, Zhao M, Islam M, Dong K, Saha S |
Atmosphere |
| Journal |
A CFD study of wind assessment in urban topology with complex wind flow |
Zhang S, Kwok K, Liu H, Jiang Y, Dong K, Wang B |
Sustainable Cities and Society |
| Journal |
DEM simulation of vibrated packing densification of mono-sized regular octahedral particles |
Wang L, An X, Wu Y, Qian Q, Zou R, Dong K |
Powder Technology |
| Journal |
Experimental and numerical studies on a new double-stage tandem nesting cyclone |
Yu G, Dong S, Yang L, Yan D, Dong K, Wei Y, Wang B |
Chemical Engineering Science |
| Journal |
DEM study on the segregation of a non-spherical intruder in a vibrated granular bed |
Qiao J, Dong K, Duan C |
Processes |
| Journal |
Aging effects on airflow distribution and micron-particle transport and deposition in a human lung using CFD-DPM approach |
Rahman M, Zhao M, Islam M, Dong K, Saha S |
Advanced Powder Technology |
| Journal |
An assessment of the mathematical models for estimating the coordination number of the packing of multisized particles |
Yi L, Zou R, Pinson D, Dong K, Yu A |
Powder Technology |
| Journal |
Dynamic investigation on the powder spreading during selective laser melting additive manufacturing |
Yao D, An X, Fu H, Zhang H, Yang X, Zou Q, Dong K |
Additive Manufacturing |
| Journal |
On the relationships between structural properties and packing density of uniform spheres |
An X, Dong K, Yang R, Zou R, Yu A |
Powder Technology |
| Journal |
Inconsistency of neighborhood based on Voronoi tessellation and Euclidean distance |
Wang S, Tian Z, Dong K, Xie Q |
Journal of Alloys and Compounds |
| Journal |
How stars are packed in the universe : a comparison with sphere packing |
Wang C, Dong K, Zou R, Yu A |
Powder Technology |
| Journal |
DEM study of segregation degree and velocity of binary granular mixtures subject to vibration |
Qiao J, Duan C, Dong K, Wang W, Jiang H, Zhu H, Zhao Y |
Powder Technology |
| Journal |
Numerical investigation of drag property for fluid flow through random arrays of elliptical cylinders |
Song S, Rong L, Dong K, Shen Y |
Powder Technology |
| Journal |
Heterogeneous condensation combined with inner vortex broken cyclone to achieve high collection efficiency of fine particles and low energy consumption |
Zhang Y, Jin R, Dong S, Wang Y, Dong K, Wei Y, Wang B |
Powder Technology |
| Journal |
Multiple heterojunction system of boron nitride-graphene/black phosphorene as highly efficient solar cell |
Zeng J, Xu L, Dong K, Yang K, Wang L |
Advanced Theory and Simulations |
| Journal |
Effect of vibration mode on self-assembly of granular spheres under three-dimensional vibration |
Amirifar R, Dong K, Zeng Q, An X, Yu A |
Powder Technology |
| Conference |
The effects of density on particle deposition in the human respiratory tract |
Rahman M. Mizanur , Zhao Ming, Islam Mohammad S., Dong Kejun, Saha Suvash C |
The Fifth Australasian Conference on Computational Mechanics (ACCM2021), 13-15 December 2021, Sydney, Australia |
| Conference |
The effects of physical activity on pollutant particle deposition in the realistic human lung airways |
Rahman M. Mizanur , Zhao Ming, Islam Mohammad S., Dong Kejun, Saha Suvash C |
The 3rd International Symposium on Computational Particle Technology, 17-21 November 2021, Suzhou, China and Melbourne, Australia |
| Conference |
Particle velocity profile in an inclined rotating drum |
Widhate P, Zhu H, Zeng Q, Dong K |
EPJ Web Conf. Volume 249, 2021: Powders & Grains 2021: 9th International Conference on Micromechanics on Granular Media, Buenos Aires, Argentina (Virtual), July 5, 13, 21, 29 and Aug 6, 2021 |
| Journal |
Production of fresh water by a solar still : an experimental case study in Australia |
Nomor E, Islam R, Alim M, Rahman A |
Water |
| Journal |
Improving household agriculture with roof-harvested rainwater : a case study in Sydney and Nairobi |
Amos C, Rahman A, Jahan S, Gathenya J, Alim M |
Water |
| Journal |
Experimental investigation of an integrated rainwater harvesting unit for drinking water production at the household level |
Alim M, Ashraf A, Rahman A, Tao Z, Roy R, Khan M, Shirin S |
Journal of Water Process Engineering |
| Journal |
Evaluation of the melting performance in a conical latent heat thermal unit having variable length fins |
Ghalambaz M, Mehryan S, Mahdavi M, Younis O, Alim M |
Sustainability |
| Journal |
A critical review on the development and challenges of concentrated solar power technologies |
Shahabuddin M, Alim M, Alam T, Mofijur M, Ahmed S, Perkins G |
Sustainable Energy Technologies and Assessments |
| Journal |
A continental scale evaluation of rainwater harvesting in Australia |
Khan Z, Alim M, Rahman M, Rahman A |
Resources, Conservation and Recycling |
| Journal |
Experimental study on lightweight concrete made with expanded clay aggregate and lime |
Hassan M, Islam M, Dhital P, Karki R |
Innovative Infrastructure Solutions |
| Journal |
Behaviour of prefabricated steel-concrete composite slabs with a novel interlocking system : numerical analysis |
Hassan M, Subramanian K, Saha S, Sheikh M |
Engineering Structures |
| Journal |
Behaviour and design of prefabricated CFST stub columns with PCC connections under compression |
Hassan M, Sheikh M, Saha S |
Thin-Walled Structures |
| Journal |
Experimental and numerical investigation of cold-form steel wall frame panels with plasterboards under flexural loading |
Hassan M, Mirza O, Al Faily F, Dutt R |
Innovative Infrastructure Solutions |
| Journal |
Flame behaviour, fire hazard and fire testing approach for lightweight composite claddings : a review |
Hossain M, Hassan M, Yuen A, He Y, Saha S, Hittini W |
Journal of Structural Fire Engineering |
| Journal |
System identification of a volumetric steel modular frame using experimental and numerical vibration analysis |
Sharafi P, Rashidi M, Alembagheri M, Bigdeli A |
Journal of Architectural Engineering |
| Journal |
Natural dynamic characteristics of volumetric steel modules with gypsum sheathed LSF walls : experimental study |
Alembagheri M, Sharafi P, Rashidi M, Bigdeli A, Farajian M |
Structures |
| Journal |
Deformation and permeability of recycled aggregate concrete : a comprehensive review |
Tam V, Soomro M, Evangelista A, Haddad A |
Journal of Building Engineering |
| Journal |
Peptide location fingerprinting reveals tissue region-specific differences in protein structures in an ageing human organ |
Eckersley A, Ozols M, Chen P, Tam V, Hoyland J, Trafford A, Chan D, Sherratt M |
International Journal of Molecular Sciences |
| Journal |
Effects of seawater and undesalted sea sand on the hydration products, mechanical properties and microstructures of cement mortar |
Qu F, Li W, Wang K, Tam V, Zhang S |
Construction and Building Materials |
| Journal |
Modelling the work-as-done in the building maintenance using a layered FRAM : a case study on HVAC maintenance |
De Souza I, Rosa A, Evangelista A, Tam V, Haddad A |
Journal of Cleaner Production |
| Journal |
Critical success factors for developing construction and demolition waste management in China |
Huang Z, Ma M, Tam V, Lang H |
Proceedings of the Institution of Civil Engineers: Engineering Sustainability |
| Journal |
A greenhouse-gas emission reduction toolkit at urban scale |
Karimipour H, Tam V, Le K, Burnie H |
Sustainable Cities and Society |
| Journal |
Effective construction and demolition waste management assessment through waste management hierarchy : a case of Australian large construction companies |
Kabirifar K, Mojtahedi M, Wang C, Tam V |
Journal of Cleaner Production |
| Journal |
Quality improvement of recycled concrete aggregate by removal of residual mortar : a comprehensive review of approaches adopted |
Tam V, Soomro M, Jorge Evangelista A |
Construction and Building Materials |
| Journal |
A critical review of combined natural ventilation techniques in sustainable buildings |
Zhang H, Yang D, Tam V, Tao Y, Zhang G, Setunge S, Shi L |
Renewable and Sustainable Energy Reviews |
| Journal |
Mechanical properties of CO2 concrete utilising practical carbonation variables |
Tam V, Butera A, Le K |
Journal of Cleaner Production |
| Journal |
Occupant behaviour and its relation to climate in Australia |
Almeida L, Tam V, Le K |
Proceedings of the Institution of Civil Engineers: Engineering Sustainability |
| Journal |
Users' building optimal performance manual |
Almeida L, Tam V, Le K |
Cleaner and Responsible Consumption |
| Journal |
Integration of life cycle assessment and life cycle cost using building information modeling : a critical review |
Lu K, Jiang X, Yu J, Tam V, Skitmore M |
Journal of Cleaner Production |
| Journal |
Effect of magnetized water on the fresh, hardened and durability properties of mortar mixes with marble waste dust as partial replacement of cement |
Ghorbani S, Mohammadi-Khatami M, Ghorbani S, Elmi A, Farzan M, Soleimani V, Negahban M, Tam V, Tavakkolizadeh M |
Construction and Building Materials |
| Journal |
Combined influence of waste steel fibre and fly ash on rheological and mechanical performance of fibre-reinforced concrete |
Akid A, Shah S, Sobuz M, Tam V, Anik S |
Australian Journal of Civil Engineering |
| Journal |
Impact of industrial agglomeration on haze pollution : new evidence from Bohai Sea economic region in China |
Lu W, Tam V, Du L, Chen H |
Journal of Cleaner Production |
| Journal |
An agent-based model approach for urban demolition waste quantification and a management framework for stakeholders |
Ding Z, Liu R, Wang Y, Tam V, Ma M |
Journal of Cleaner Production |
| Journal |
Durability deterioration of concrete under marine environment from material to structure : a critical review |
Qu F, Li W, Dong W, Tam V, Yu T |
Journal of Building Engineering |
| Journal |
Implementing lean construction techniques and management methods in Chinese projects : a case study in Suzhou, China |
Xing W, Hao J, Qian L, Tam V, Sikora K |
Journal of Cleaner Production |
| Journal |
Reducing labor productivity losses through a productivity stratification indicator |
De Araujo L, Caldas C, Tam V |
Journal of Architectural Engineering |
| Journal |
A regression-based framework to examine thermal loads of buildings |
Najjar M, Rosa A, Hammad A, Vazquez E, Jorge Evangelista A, Tam V, Haddad A |
Journal of Cleaner Production |
| Journal |
Mapping the knowledge domains of emerging advanced technologies in the management of prefabricated construction |
Li C, Hu M, Xiao B, Chen Z, Tam V, Zhao Y |
Sustainability |
| Journal |
New hybrid simulation model of urban construction waste management : an empirical study in Shenzhen, China |
Ding Z, Cao X, Shi M, Tam V, Illankoon C |
Proceedings of the Institution of Civil Engineers: Engineering Sustainability |
| Journal |
CO2 concrete and its practical value utilising living lab methodologies |
Tam V, Butera A, Le K, Li W |
Cleaner Engineering and Technology |
| Journal |
Performance of recycled aggregate concrete filled steel tubular (RACFST) stub columns with expansive agent |
Tam V, Tao Z, Jorge Evangelista A |
Construction and Building Materials |
| Journal |
Critical review of the threats affecting the building of critical infrastructure resilience |
Osei-Kyei R, Tam W, Ma M, Mashiri F |
International Journal of Disaster Risk Reduction |
| Journal |
[In Press] Environmental impacts assessment for Australian buildings : thermal resistance and environmental impacts relationship |
Tran C, Tam V, Le K, Illankoon C |
International Journal of Construction Management |
| Journal |
Methods to improve microstructural properties of recycled concrete aggregate : a critical review |
Tam V, Wattage H, Le K, Butera A, Soomro M |
Construction and Building Materials |
| Journal |
Flexural behavior of corroded reinforced concrete beam strengthened with jute fiber reinforced polymer |
Akid A, Al Wasiew Q, Sobuz M, Rahman T, Tam V |
Advances in Structural Engineering |
| Journal |
United Nation's sustainable development goals : establishing baseline for Australian building sector |
Illankoon C, Tam V, Le K |
Intelligent Buildings International |
| Journal |
Effective strategies for developing retirement village public - private partnership |
Osei-Kyei R, Tam V, Ma M |
International Journal of Housing Markets and Analysis |
| Journal |
Performance deterioration of sustainable recycled aggregate concrete under combined cyclic loading and environmental actions |
Lei B, Li W, Luo Z, Li X, Tam V, Tang Z |
Journal of Sustainable Cement-Based Materials |
| Journal |
Life-cycle analysis by using the alternative sustainable water innovations in residential dwellings |
Tam V, Kim K, Brohier A |
International Journal of Construction Management |
| Journal |
A review on international ecological legislation on energy consumption : greenhouse gas emission management |
Tam V, Le K, Tran C, Illankoon C |
International Journal of Construction Management |
| Conference |
Building occupants and the lack of awareness in energy conservation measures |
Almeida L, Tam V, Le K |
Proceedings of the 44th Australasian Universities Building Education Association Conference (AUBEA 2021): Construction Education: Live the Future, Virtual Conference, Deakin University, Australia, 28 - 29 October 2021 |
| Conference |
Adopting life cycle assessment for various greenhouse typologies in multiple cropping environment in Australia |
Jorge Evangelista A, Lan Y, Chen Z, Tam V, Datt R |
EcoDesign and Sustainability II: Social Perspectives and Sustainability Assessment: Proceedings of the 11th International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Yokohama, Japan, 25-27 November 2019 |
| Conference |
Process modelling for an efficient and dynamic energy consumption for fresh produce in protected cropping |
Samaranayake P, Lopaticki G, Liang W, Tam V, Chen Z, Lan Y |
EcoDesign and Sustainability II: Social Perspectives and Sustainability Assessment: Proceedings of the 11th International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Yokohama, Japan, 25-27 November 2019 |
| Journal |
[In Press] Bayesian framework for updating seismic loss functions with limited observational data in low-to-moderate seismicity regions |
Choi I, Kim J, Kang W, Kim Y |
Journal of Earthquake Engineering |
| Journal |
Reliability considerations of modern design codes for CFST columns |
Thai H, Thai S, Ngo T, Uy B, Kang W, Hicks S |
Journal of Constructional Steel Research |
| Journal |
Structural system reliability : overview of theories and applications to optimization |
Song J, Kang W, Lee Y, Chun J |
ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering |
| Journal |
An ultra-lightweight CFRP beam-string structure |
Zhang J, Zhou P, Guan C, Liu T, Kang W, Feng P, Gao S |
Composite Structures |
| Journal |
Design resistance of helical seam pipe columns with limited tensile test data |
Kang W, Hicks S, Uy B, Aslani F |
Journal of Constructional Steel Research |
| Journal |
Statistical data expansion using Kriging for probabilistic capacity factor calibration |
Kang W, Tao Z |
Engineering Structures |
| Journal |
Incorporation of recycled polypropylene and fly ash in polypropylene-based composites for automotive applications |
Ajorloo M, Ghodrat M, Kang W |
Journal of Polymers and the Environment |
| Journal |
Tensile stress-strain models for high strength steels |
Wang X, Tao Z, Katwal U, Hou C |
Journal of Constructional Steel Research |
| Journal |
Development of piezoresistive cement-based sensor using recycled waste glass cullets coated with carbon nanotubes |
Dong W, Guo Y, Sun Z, Tao Z, Li W |
Journal of Cleaner Production |
| Journal |
A comprehensive review on performance of cementitious and geopolymeric concretes with recycled waste glass as powder, sand or cullet |
Dong W, Li W, Tao Z |
Resources, Conservation and Recycling |
| Journal |
Behaviour of austenitic stainless steel bolts at elevated temperatures |
Wang H, Hu Y, Wang X, Tao Z, Tang S, Pang X, Chen Y |
Engineering Structures |
| Journal |
Simplified nonlinear simulation of rectangular concrete-filled steel tubular columns |
Tao Z, Katwal U, Uy B, Wang W |
Journal of Structural Engineering |
| Conference |
Mechanical properties of geopolymer mortars activated with laboratory-made sodium silicate |
Aziz T, Tao Z, Pan Z, Rahme D |
Proceedings of the 30th Biennial National Conference of Concrete Institute of Australia, Virtual Conference, 5-8 September 2021 |
| Journal |
Mechanical properties of recycled aggregate concretes containing silica fume and steel fibres |
Jahandari S, Mohammadi M, Rahmani A, Abolhasani M, Miraki H, Mohammadifar L, Kazemi M, Saberian M, Rashidi M |
Materials |
| Journal |
Utilizing artificial intelligence to predict the superplasticizer demand of self-consolidating concrete incorporating pumice, slag, and fly ash powders |
Liu J, Mohammadi M, Zhan Y, Zheng P, Rashidi M, Mehrabi P |
Materials |
| Journal |
A novel slip sensory system for interfacial condition monitoring of steel-concrete composite bridges |
Sadeghi F, Zhu X, Li J, Rashidi M |
Remote Sensing |
| Journal |
Multihybrid dispute resolution framework for projects of downstream sector of petroleum industry |
Faraji A, Rashidi M, Tezangi M, Perera S |
Journal of Legal Affairs and Dispute Resolution in Engineering and Construction |
| Journal |
Application of artificial intelligence to evaluate the fresh properties of self-consolidating concrete |
Feng Y, Mohammadi M, Wang L, Rashidi M, Mehrabi P |
Materials |
| Journal |
Text mining risk assessment-based model to conduct uncertainty analysis of the general conditions of contract in housing construction projects : case study of the NSW GC21 |
Faraji A, Rashidi M, Perera S |
Journal of Architectural Engineering |
| Journal |
Experimental and informational modeling study on flexural strength of eco-friendly concrete incorporating coal waste |
Dabbaghi F, Rashidi M, Nehdi M, Sadeghi H, Karimaei M, Rasekh H, Qaderi F |
Sustainability |
| Journal |
Numerical and analytical study of ultimate capacity of steel plate shear walls with partial plate-column connection (SPSW-PC) |
Gorji Azandarani M, Rousta A, Mohammadi M, Rashidi M, Abdolmaleki H |
Structures |
| Journal |
Digital twin application in the construction industry : a literature review |
Opoku D, Perera S, Osei-Kyei R, Rashidi M |
Journal of Building Engineering |
| Journal |
A risk analysis-best worst method based model for selection of the most appropriate contract strategy for onshore drilling projects in the Iranian petroleum industry |
Faraji A, Rashidi M, Khadir P, Perera S |
Buildings |
| Journal |
Estimating compressive strength of concrete containing untreated coal waste aggregates using ultrasonic pulse velocity |
Karimaei M, Dabbaghi F, Dehestani M, Rashidi M |
Materials |
