Associate Professor Baolin Wang

Associate Professor Baolin Wang

Academic Program Advisor, Postgraduate Engineering,
Centre for Infrastructure Engineering

Associate Professor - Infrastructure Computations,
Centre for Infrastructure Engineering

Biography

Qualifications

  • PhD Harbin Institute of Technology

Organisational Unit (School / Division)

  • Centre for Infrastructure Engineering
  • Centre for Infrastructure Engineering

Contact

Email: B.Wang@westernsydney.edu.au
Phone:
Mobile:
Location:

PLEASE NOTE: obtaining information from this Directory must be for the legitimate purposes of doing business with and within Western Sydney University, and must not be used for unsolicited bulk e-mailing (spamming) or similar purposes.

Teaching

Previous Teaching Areas

  • 300986 Applied Mechanics, 2016
  • 301010 Advanced Applied Mechanics, 2016

Publications

Books

  • Wang, B., Han, J. and Du, S. (2008), 'Coupled Thermo-Electro-Magneto-Mechanical Cracking of Non-Homogeneous Media', : Nova 9781594542718.
  • Wang, B., Han, J. and Zhang, X. (2003), 'Mechanics of Nonhomogeneous Materials', : Science Publishing 9787030117861.
  • Wang, B. (2003), 'Failure Mechanics of Piezoelectric Materials and Structures', : National Defence Industry Publishing House 9787118031133.

Chapters in Books

  • Wang, B., Han, J. and Du, S. (2010), 'Thermally induced cracking of piezoelectric materials', Piezoelectric Materials: Structure, Properties and Applications, Nova 9781608762729.
  • Wang, B., Han, J. and Du, S. (2010), 'Transient thermal fracture of piezoelectric materials structures', Piezoelectric Materials: Structure, Properties and Applications, Nova 9781608762729.
  • Wang, B. (2009), 'Fracture and reliability issues of materials with magnetoelectric coupling', Magnetic Materials: Research, Technology and Applications, Nova 9781606921456.

Journal Articles

  • Zhang, A., Lou, J., Wang, B. and Huang, W. (2024), 'An analytical model for thermoelastic crack problems in a strip incorporating convective heat transfer between lateral surfaces and ambient environment', Engineering Fracture Mechanics, vol 295 .
  • Zhang, A., Pang, D., Wang, B. and Wang, J. (2023), 'Dynamic responses of wearable thermoelectric generators used for skin waste heat harvesting', Energy, vol 262, no Part B .
  • Zhang, Y., Wang, B., Zhang, C., Yang, Y. and Guo, S. (2023), 'One dimensional transient thermoelastic and associated fracture analysis of long porous ceramic plate', Archive of Applied Mechanics, vol 93, no 7 , pp 2681 - 2692.
  • Liu, Y., Wang, B., Wang, K. and Yang, J. (2023), '[In Press] Transient model and parameters matching of a segmented solar thermoelectric system', International Journal of Green Energy, .
  • Li, J. and Wang, B. (2023), 'A horizontal punch on a layered and orthotropic composite system with negative Poisson's ratio', Mechanics of Advanced Materials and Structures, vol 30, no 10 , pp 2101 - 2110.
  • Wang, B., Hu, J. and Zheng, L. (2023), 'Nonlocal model of electromechanical fields and effective properties of piezoelectric materials with rigid and electrically conductive inclusions', Mechanics of Materials, vol 176 .
  • Zhang, A., Lou, J., Wang, B. and Wang, J. (2023), 'A Griffith crack model in a generalized nonhomogeneous interlayer of bonded dissimilar half-planes', Journal of Theoretical and Applied Mechanics, vol 61, no 3 , pp 495 - 507.
  • Liu, Y. and Wang, B. (2023), 'Nonlocal fields and effective properties of piezoelectric material with a rigid line inclusion perpendicular to the poling direction', Archive of Applied Mechanics, vol 93, no 3 , pp 1273 - 1289.
  • Hu, J., Wang, B., Hirakata, H. and Wang, K. (2023), 'Thermal shock fracture analysis of auxetic honeycomb layer based on non-Fourier heat conduction', Engineering Structures, vol 279 .
  • Xu, Z., Wang, B., Zhang, P., Gu, X. and Zhang, Z. (2023), 'Crack branching and deflection in AISI 4340 steel under cyclic torsional loading', Materials Science and Engineering: A, vol 863 .
  • Wang, K., Wang, B. and Zheng, L. (2023), 'Dual photo- and magneto-responses of layered beams composed of liquid crystal elastomers and magnetic responsive elastomers', Acta Mechanica, vol 234, no 9 , pp 4095 - 4110.
  • Liu, Y. and Wang, B. (2022), 'Static and transient thermal conductions and associated thermal stresses in an elastic strip with a rigid line inclusion', Mechanics Research Communications, vol 125 .
  • Pang, D., Zhang, A., Wen, Z., Wang, B. and Wang, J. (2022), 'Energy conversion efficiency of thermoelectric power generators with cylindrical legs', Journal of Energy Resources Technology, vol 144, no 3 .
  • Hu, J., Wang, B., Li, J. and Li, Z. (2022), 'Thermal shock resistance enhancement of auxetic honeycomb layer considering multi-cracking and temperature-dependent material properties', International Communications in Heat and Mass Transfer, vol 135 .
  • Zhang, A., Wang, J. and Wang, B. (2022), 'Bio-thermo-viscoelastic behavior in multilayer skin tissue', Journal of Thermal Stresses, vol 45, no 7 , pp 559 - 575.
  • Li, J. and Wang, B. (2022), 'A conductive line inclusion in thermoelectric materials : the thermoelectric fields and the effective thermoelectric properties', Philosophical Magazine, vol 102, no 22 , pp 2282 - 2301.
  • Wang, B. and Li, J. (2022), 'A rigid line inclusion in a nonlocal elastic medium : mode I deformation', Engineering Fracture Mechanics, vol 267 .
  • Wang, P., Wang, K., Wang, B., Xi, L., Sano, K., Shimada, T., Hirakata, H. and Fang, D. (2022), 'Interlaminar fracture toughness measurement of multilayered 2D thermoelectric materials Bi2Te3 by a tapered cantilever bending experiment', Experimental Mechanics, vol 62, no 1 , pp 165 - 180.
  • Wang, J., Bai, X., Shen, X., Liu, X. and Wang, B. (2022), 'Effect of micro-texture on substrate surface on adhesion performance of electroless Ni-P coating', Journal of Manufacturing Processes, vol 74 , pp 296 - 307.
  • Liu, S., Wang, K., Wang, B., Li, J. and Zhang, C. (2022), 'A geometrically nonlinear isogeometric model for multilayered microplates under thermo-mechanical load and its application to flexible organic solar cells', Composite Structures, vol 281 .
  • Joseph, R., Zhang, C., Wang, B., Samali, B., Goh, K. and Purbolaksono, J. (2021), 'Analyzing size effects in a cracked orthotropic layer under antiplane shear loading', Archive of Applied Mechanics, vol 91, no 3 , pp 1097 - 1112.
  • Luo, T., Mao, Q., Zeng, S., Wang, K., Wang, B., Wu, J. and Lu, Z. (2021), 'Scale effect on the nonlinear vibration of piezoelectric sandwich nanobeams on Winkler foundation', Journal of Vibration Engineering and Technologies, vol 9, no 6 , pp 1289 - 1303.
  • Wang, P., Wang, B., Wang, K. and Xi, L. (2021), 'Effective behaviors of anisotropic thermoelectric composites containing ellipsoidal inclusions', Composite Structures, vol 267 .
  • Wang, P., Wang, B., Wang, K., Gao, R. and Xi, L. (2021), 'An analytical model for performance prediction and optimization of thermoelectric generators with varied leg cross-sections', International Journal of Heat and Mass Transfer, vol 174 .
  • Chang, D., Wang, B., Liu, X., Wang, T., Jin, G. and Han, J. (2021), 'Non-Fourier thermal shock resistance and transient thermal fracture of magneto-electro-elastic composite with a penny-shaped crack', Engineering Fracture Mechanics, vol 253 .
  • Cui, Y., Wang, B. and Wang, K. (2021), 'Energy conversion performance optimization and strength evaluation of a wearable thermoelectric generator made of a thermoelectric layer on a flexible substrate', Energy, vol 229 .
  • Wang, K., Wang, B., Zheng, L., Zhang, Y. and Zhang, C. (2021), 'Bending behavior and its effect on switching performance of an all-optical switch', Journal of Physics D: Applied Physics, vol 54, no 15 .
  • Liu, S., Wang, K., Wang, B., Li, J. and Zhang, C. (2021), 'Sunlight irradiation and wind effect on the interlaminar stresses of the organic solar cell', Archive of Applied Mechanics, vol 91, no 7 , pp 3203 - 3221.
  • Ren, C., Wang, K. and Wang, B. (2021), 'Analysis of piezoelectric PN homojunction and heterojunction considering flexoelectric effect and strain gradient', Journal of Physics D: Applied Physics, vol 54, no 49 .
  • Wu, Z., Wang, B., Hou, S. and Zheng, L. (2021), 'Degeneration of power output of a flexible and wearable thermoelectric module under bending fatigue', Mechanics of Materials, vol 161 .
  • Li, Z., Wang, K., Wang, B. and Li, J. (2021), 'Size effect on the punch performance of brittle porous ceramics : theoretical analysis and numerical simulation', International Journal of Mechanical Sciences, vol 207 .
  • Li, Z., Wang, B. and Wang, K. (2021), 'Mechanism of crack initiation and propagation of re-entrant auxetic honeycombs under thermal shock', Journal of Applied Mechanics, vol 88, no 11 .
  • Guo, S., Zhang, Y., Wang, K., Wang, B. and Zhang, C. (2021), 'Effects of non-Fourier heat conduction and surface heating rate on thermoelastic waves in semi-infinite ceramics subject to thermal shock', Ceramics International, vol 47, no 12 , pp 17494 - 17501.
  • Liu, S., Wang, K., Wang, B., Li, J. and Zhang, C. (2021), 'Isogeometric analysis of bending, vibration, and buckling behaviors of multilayered microplates based on the non-classical refined shear deformation theory', Acta Mechanica, vol 232, no 8 , pp 2991 - 3010.
  • Hu, J. and Wang, B. (2021), 'Crack growth behavior and thermal shock resistance of ceramic sandwich structures with an auxetic honeycomb core', Composite Structures, vol 260 .
  • Sun, N., Wang, G., Zhao, H., Cai, Y., Li, J., Li, G., Zhang, X., Wang, B., Han, J., Wang, Y. and Yang, Y. (2021), 'Waterproof, breathable and washable triboelectric nanogenerator based on electrospun nanofiber films for wearable electronics', Nano Energy, vol 90 .
  • Li, Z., Wang, K. and Wang, B. (2021), 'Indentation resistance of brittle auxetic structures : combining discrete representation and continuum model', Engineering Fracture Mechanics, vol 252 .
  • Li, Z., Wang, B., Wang, K. and Zheng, L. (2021), 'Improving thermomechanical properties of cracked brittle honeycombs by negative Poisson's ratio effect', Composite Structures, vol 266 .
  • Hu, J. and Wang, B. (2021), 'Enhanced fatigue performance of auxetic honeycomb/substrate structures under thermal cycling', International Journal of Mechanical Sciences, vol 199 .
  • Xu, F., Zhang, S., Wang, G., Zhao, D., Feng, J., Wang, B. and He, X. (2021), 'Lightweight low-frequency sound-absorbing composites of graphene network reinforced by honeycomb structure', Advanced Materials Interfaces, vol 8, no 16 .
  • Lu, F., Li, J., Guo, W., Wang, B. and Zhang, Y. (2021), 'Origin of magnetic relaxation barriers in a family of cobalt(II)-radical single-chain magnets : density functional theory and Ab initio calculations', Inorganic Chemistry, vol 60, no 2 , pp 1007 - 1015.
  • Wang, P., Wang, K., Xi, L., Gao, R. and Wang, B. (2021), 'Fast and accurate performance prediction and optimization of thermoelectric generators with deep neural networks', Advanced Materials Technologies, vol 6, no 7 .
  • Yan, Z., Wang, K. and Wang, B. (2021), 'Mechanical design and analytic solution for unfolding deformation of locomotive ferromagnetic robots', International Journal of Mechanical Sciences, vol 211 .
  • Abdelsalam, H., Teleb, N., Wang, B., Yunoki, S. and Zhang, Q. (2021), 'The electronic, adsorption, and catalytic properties of Bi-, Sb-, and As-nanoclusters', Catalysis Today, vol 376 , pp 126 - 133.
  • Wang, J., Ma, L., Liang, Y., Yang, X., Wei, S., Peng, H., Qiu, S., Lu, X., Zhu, Y. and Wang, B. (2021), 'RCN1 induces sorafenib resistance and malignancy in hepatocellular carcinoma by activating c-MYC signaling via the IRE1a-XBP1s pathway', Cell Death Discovery, vol 7, no 1 .
  • Ren, C., Wang, K. and Wang, B. (2021), 'Analysis of static extension of piezoelectric semiconductor nanowires considering non-uniform strain and flexoelectric effects', EPL, vol 134, no 5 .
  • Wang, K. and Wang, B. (2021), 'Is there only one equilibrium configuration for spontaneous bending of liquid crystal elastomer circular plates with free edges?', European Physical Journal E, vol 44, no 10 .
  • Su, G., Wang, Y., Han, Z., Zhang, P., Zhang, H., Wang, B. and Liu, Z. (2021), 'Wear characteristics of cutting tool in brittle removal of a ductile meta in high-speed machining', Symmetry, vol 13, no 9 .
  • Wang, K. and Wang, B. (2021), 'Magnetostriction-induced stress in an orthotropic mechanical thin high-Temperature superconducting disk based on the exponential model of critical state', Modern Physics Letters B, vol 35, no 5 .
  • Zeng, S., Peng, Z., Wang, K., Wang, B., Wu, J. and Luo, T. (2021), 'Nonlinear analyses of porous functionally graded sandwich piezoelectric nano-energy harvesters under compressive axial loading', Applied Sciences, vol 11, no 24 .
  • Zhao, D., Xu, F., Wang, G., Zhang, S., Qin, G., Wang, B. and Han, J. (2021), 'SiO2/HfO2 laser film with enhanced protection and antireflection for sapphire infrared windows at high temperatures', ACS Applied Electronic Materials, vol 3, no 10 , pp 4611 - 4617.
  • Cui, Y., Wang, B., Li, J. and Wang, K. (2020), 'Performance evaluation and lifetime prediction of a segmented photovoltaic-thermoelectric hybrid system', Energy Conversion and Management, vol 211 .
  • Li, J. and Wang, B. (2020), 'Effect of negative Poisson's ratio on the fracture mechanics parameters due to mechanical and thermal loads', International Journal of Engineering Science, vol 150 .
  • Ren, C., Wang, K. and Wang, B. (2020), 'Adjusting the electromechanical coupling behaviors of piezoelectric semiconductor nanowires via strain gradient and flexoelectric effects', Journal of Applied Physics, vol 128, no 21 .
  • Liu, Y., Wang, B. and Wang, K. (2020), 'Mechanical model for the interfacial thermal stress in porous ceramic foam coatings bonded to a substrate', Mechanics of Advanced Materials and Structures, vol 27, no 12 , pp 941 - 947.
  • Wang, B. and Li, J. (2020), 'Fracture behavior and thermal shock resistance analysis of thermoelectric material plates and shells under thermal and electric shocks', Engineering Fracture Mechanics, vol 225 .
  • Liu, Y., Wang, K. and Wang, B. (2020), 'Instability-induced wrinkling in thermoelectric thin film/substrate structures for thermal protection systems in supersonic space shuttle applications', Mechanics of Advanced Materials and Structures, vol 27, no 6 , pp 455 - 461.
  • Cui, Y., Wang, K., Zheng, L., Wang, B. and Zhang, C. (2020), 'Theoretical model of fatigue crack growth of a thermoelectric pn-junction bonded to an elastic substrate', Mechanics of Materials, vol 151 .
  • Liu, Y., Wang, B., Li, J. and Wang, K. (2020), 'Thermoelectric and stress fields for a cracked thermoelectric media based on the electric field saturation model', Mechanics Research Communications, vol 104 .
  • Lu, F., Ding, M., Li, J., Wang, B. and Zhang, Y. (2020), 'Why lanthanide ErIII SIMs cannot possess huge energy barriers: a theoretical investigation', Dalton Transactions, vol 49, no 41 , pp 14576 - 14583.
  • Su, H., Shen, X., Xu, C., He, J., Wang, B. and Su, G. (2020), 'Surface characteristics and corrosion behavior of TC11 titanium alloy strengthened by ultrasonic roller burnishing at room and medium temperature', Journal of Materials Research and Technology, vol 9, no 4 , pp 8172 - 8185.
  • Shi, Y., Shen, X., Xu, G., Xu, C., Wang, B. and Su, G. (2020), 'Surface integrity enhancement of austenitic stainless steel treated by ultrasonic burnishing with two burnishing tips', Archives of Civil and Mechanical Engineering, vol 20, no 3 .
  • Wang, K., Wang, B. and Li, J. (2020), 'Electromechanical model of layered flexoelectric energy harvesters with strain gradient effect', Energy, vol 191 .
  • Wang, K., Wang, B., Lin, K., Li, J. and Liu, Y. (2020), 'Nonlinear dynamics of electrostatically actuated micro-pumps with thermal effects and filled fluids', International Journal of Non-Linear Mechanics, vol 121 .
  • Wang, X., Shen, N., Wu, J., Wang, B. and Wan, J. (2020), 'Predicting quantum spin hall effect in graphene/GaSb and normal strain-controlled band structures', Applied Surface Science, vol 526 .
  • Wang, X., Shen, N., Yang, X. and Wang, B. (2020), 'Bismuthene: Epitaxially grown on MoTe2 and its grain boundary', Journal of Crystal Growth, vol 546 .
  • Yan, Z., Wang, B., Wang, K., Zhao, S., Li, S., Huang, Y. and Wang, H. (2020), 'Cellular substrate to facilitate global buckling of serpentine structures', Journal of Applied Mechanics, vol 87, no 2 .
  • Wang, B., Li, A. and Liu, G. (2020), 'Cutting performance and wear mechanisms of TiAlN PVD-coated cemented carbide tool in high speed turning of Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy', Journal of Mechanical Science and Technology, vol 34, no 7 , pp 2997 - 3006.
  • Fan, L., Zhu, Y., Zhao, S., Wang, Z., Liu, Z., Zhu, L., Wang, B. and Zhang, Q. (2020), 'Modulation of VO2 metal-insulator transition by co-doping of hydrogen and oxygen vacancy', Solar Energy Materials and Solar Cells, vol 212 .
  • Wang, K. and Wang, B. (2019), 'A double cantilever beam model for fracture toughness analysis of superconductors', Physica C: Superconductivity and its Applications, vol 558 , pp 38 - 43.
  • Wang, Y., Wang, B., Wang, K. and Zheng, L. (2019), 'Effect of temperature-dependent critical current density on the fracture behavior for a rectangular superconducting slab with a center crack', Physica C: Superconductivity and its Applications, vol 556 , pp 36 - 42.
  • Wang, K. and Wang, B. (2019), 'Approximate and explicit expression of optical forces and pull-in instability of a silicon nano-optomechanical device', Nanotechnology, vol 30, no 8 .
  • Cui, Y., Wang, K., Wang, B. and Zheng, L. (2019), 'Effect of buckling on the cooling performance of free-standing planar thermoelectric coolers', Journal of Thermal Stresses, vol 42, no 8 , pp 962 - 975.
  • Huo, Y., Chen, Y., Wu, S., Liu, J., Jia, J., Chen, W., Wang, B., Zhang, Y. and Tong, M. (2019), 'Effect of bridging ligands on magnetic behavior in dinuclear dysprosium cores supported by polyoxometalates', Inorganic Chemistry, vol 58, no 2 , pp 1301 - 1308.
  • Zhang, B., Fan, L., Hu, J., Gu, J., Wang, B. and Zhang, Q. (2019), 'MnB2 nanosheet and nanotube: stability, electronic structures, novel functionalization and application for Li-ion batteries', Nanoscale, vol 11, no 16 , pp 7857 - 7865.
  • Miao, H., Li, H., Shen, F., Wei, H., Wang, B. and Wang, X. (2019), 'A family of lanthanide complexes with a bis-tridentate nitronyl nitroxide radical : syntheses, structures and magnetic properties', Dalton Transactions, vol 48, no 27 , pp 10337 - 10345.
  • Wang, X., Yang, X., Shen, N., Wang, B., Ge, G., Wang, G. and Wan, J. (2019), 'Atomistic insights into the growth of Bi (110) thin films on Cu (111) substrate', Applied Surface Science, vol 481 , pp 1449 - 1458.
  • Yang, X., Shu, H., Wang, X., Shen, Y., Shen, N., Wang, B., Wan, J. and Wang, G. (2019), 'Negative electron affinity driven broadband absorption of Cs3+nPbnSb2I9+3n/GaN van der Waals heterostructures', Journal of Materials Chemistry A, vol 7, no 39 , pp 22346 - 22352.
  • Fan, B., Ge, G., Wang, B., Wang, G. and Wan, J. (2019), 'Structures and Properties of Core-Shell B@Mn8@Mg10 Cluster and Brief of Efficient Core-Shell Cluster Algorithm and Global Minima Algorithm Based on a Sequential Microdisplacement Press-Expand Method', Journal of Physical Chemistry C, vol 123, no 17 , pp 11162 - 11170.
  • Liu, Y., Wang, K. and Wang, B. (2019), 'Transient thermal stresses in a laminated spherical shell of thermoelectric materials', Journal of Mechanics of Materials and Structures, vol 14, no 3 , pp 323 - 341.
  • Liu, Z., Chen, X., Zhu, Y., Zhao, S., Wang, Z., Wang, F., Meng, Q., Zhu, L., Zhang, Q., Wang, B. and Fan, L. (2019), 'Well dispersed SnO2 nanoclusters preparation and modulation of metal-insulator transition induced by ionic liquid', Chinese Journal of Chemical Physics, vol 32, no 2 , pp 248 - 252.
  • Ge, Y., Huang, Y., Montenegro, J., Cui, Y., Liu, W., Li, Y. and Wang, B. (2019), 'Synthesis, Structures, and Single-Molecule Magnetic Properties of Three Dy2 Complexes', Chemistry: An Asian Journal, vol 14, no 7 , pp 986 - 994.
  • Cui, Y., Xu, Y., Liu, X., Li, Y., Wang, B., Dong, Y., Li, W. and Lei, S. (2019), 'Field-Induced Single-Ion Magnetic Behavior in Two Mononuclear Cobalt(II) Complexes', Chemistry: An Asian Journal, vol 14, no 15 , pp 2620 - 2628.
  • Ge, Y., Li, D., Wang, G., Cui, Y., Najib, M., Li, Y. and Wang, B. (2019), 'Single-Molecule Magnetism in Three Dy2 Complexes from the Use of a Pentadentate Schiff Base Ligand and Different Benzoates', Chemistry: An Asian Journal, vol 14, no 16 , pp 2846 - 2852.
  • Zeng, S., Wang, K., Wang, B. and Guo, T. (2018), 'Large deformation of nonlinear elastic nanoflms with surface energy', Microsystem Technologies, vol 24, no 2 , pp 995 - 1001.
  • Cui, Y., Wang, B. and Wang, P. (2018), 'Analysis of thermally induced delamination and buckling of thin-film thermoelectric generators made up of pn-junctions', International Journal of Mechanical Sciences, vol 149 , pp 393 - 401.
  • Guo, S., Wang, B. and Li, J. (2018), 'Surface thermal shock fracture and thermal crack growth behavior of thin plates based on dual-phase-lag heat conduction', Theoretical and Applied Fracture Mechanics, vol 96 , pp 105 - 113.
  • Joseph, R., Wang, B. and Samali, B. (2018), 'Size-dependent stress intensity factors in a gradient elastic double cantilever beam with surface effects', Archive of Applied Mechanics, vol 88, no 10 , pp 1815 - 1828.
  • Joseph, R., Wang, B. and Samali, B. (2018), 'Large deformation and strain gradient fracture analysis of double cantilever beams with piezoelectric effect', Journal of Engineering Mechanics, vol 144, no 8 .
  • Zeng, S., Wang, B. and Wang, K. (2018), 'Analyses of natural frequency and electromechanical behavior of flexoelectric cylindrical nanoshells under modified couple stress theory', Journal of Vibration and Control, vol 25, no 3 , pp 559 - 570.
  • Luo, J., Zhang, C., Duan, Z., Wang, B., Li, Q., Chung, K., Zhang, J. and Chen, S. (2018), 'Influences of multi-walled carbon nanotube (MCNT) fraction, moisture, stress/strain level on the electrical properties of MCNT cement-based composites', Sensors and Actuators A: Physical, vol 280 , pp 413 - 421.
  • Chang, D., Liu, X., Wang, B., An, Y., Wang, Q. and Wang, T. (2018), 'Non-Fourier thermal shock fracture of solids with shallow semi-elliptical surface crack', Theoretical and Applied Fracture Mechanics, vol 96 , pp 160 - 167.
  • Luo, J., Zhang, C., Li, L., Wang, B., Li, Q., Chung, K. and Liu, C. (2018), 'Intrinsic sensing properties of chrysotile fiber reinforced piezoelectric cement-based composites', Sensors, vol 18, no 9 .
  • Cui, Y., Wang, B., Wang, K. and Li, J. (2018), 'Fracture mechanics analysis of delamination buckling of a porous ceramic foam coating from elastic substrates', Ceramics International, vol 44, no 15 , pp 17986 - 17991.
  • Cui, Y., Wang, K., Wang, B. and Wang, P. (2018), 'Analysis of thermally induced delamination of thermoelectric thin film/substrate system', International Journal of Fracture, vol 214, no 2 , pp 201 - 208.
  • Zhu, L., Zhang, C., Guan, X., Uy, B., Sun, L. and Wang, B. (2018), 'The multi-axial strength performance of composite structural B-C-W members subjected to shear forces', Steel and Composite Structures, vol 27, no 1 , pp 75 - 87.
  • Hou, X., Zhang, R. and Wang, B. (2018), 'Novel self-reinforcing ZrO2-SiO2 aerogels with high mechanical strength and ultralow thermal conductivity', Ceramics International, vol 44, no 13 , pp 15440 - 15445.
  • Wang, K. and Wang, B. (2018), 'A mechanical degradation model for bidirectional natural fiber reinforced composites under hydrothermal ageing and applying in buckling and vibration analysis', Composite Structures, vol 206 , pp 594 - 600.
  • Babu, B., Wang, G., Baker, A. and Wang, B. (2018), 'Synthesis, photoluminescence, energy transfer and thermal stability of SmPO4@SiO2:Eu3+ core-shell structured red phosphors for WLEDs', Journal of Alloys and Compounds, vol 766 , pp 74 - 87.
  • Ye, C., Zhang, R., An, Z. and Wang, B. (2018), 'A machinable carbon aerogel composite with a low thermal conductivity and enhanced mechanical properties', Advances in Applied Ceramics, vol 117, no 8 , pp 468 - 475.
  • Liu, Y., Wang, K. and Wang, B. (2018), 'Mechanics modeling of dynamic characteristics of laminated thermoelectric cylindrical shells', Applied Thermal Engineering, vol 136 , pp 730 - 739.
  • Li, J. and Wang, B. (2018), 'Strain gradient fracture of a mode III crack in an elastic layer on a substrate', Journal of Mechanics of Materials and Structures, vol 13, no 4 , pp 555 - 570.
  • Shao, D., Shi, L., Yin, L., Wang, B., Wang, Z., Zhang, Y. and Wang, X. (2018), 'Reversible on-off switching of both spin crossover and single-molecule magnet behaviours via a crystal-to-crystal transformation', Chemical Science, vol 9, no 41 , pp 7986 - 7991.
  • Wang, X., Yang, X., Wang, B., Wang, G. and Wan, J. (2018), 'Significant band gap induced by uniaxial strain in graphene/blue phosphorene bilayer', Carbon, vol 130 , pp 120 - 126.
  • Fan, L., Wang, X., Wang, F., Zhang, Q., Zhu, L., Meng, Q., Wang, B., Zhang, Z. and Zou, C. (2018), 'Revealing the role of oxygen vacancies on the phase transition of VO2 film from the optical-constant measurements', RSC Advances, vol 8, no 34 , pp 19151 - 19156.
  • Ge, J., Wang, H., Su, J., Li, J., Wang, B., Zhang, Y. and Zuo, J. (2018), 'Modulating the magnetic interaction in new triple-decker dysprosium(III) single-molecule magnets', Inorganic Chemistry, vol 57, no 3 , pp 1408 - 1416.
  • Bai, Y., Luo, G., Meng, L., Zhang, Q., Xu, N., Zhang, H., Wu, X., Kong, F. and Wang, B. (2018), 'Single-layer ZnMN2 (M = Si, Ge, Sn) zinc nitrides as promising photocatalysts', Physical Chemistry Chemical Physics, vol 20, no 21 , pp 14619 - 14626.
  • Zhang, B., Huang, Y., Bao, W., Wang, B., Meng, Q., Fan, L. and Zhang, Q. (2018), 'Two-dimensional stable transition metal carbides (MnC and NbC) with prediction and novel functionalizations', Physical Chemistry Chemical Physics, vol 20, no 39 , pp 25437 - 25445.
  • Zhen, S., Zhu, L., Dong, Z., Fan, L., Wang, B. and Zhang, Q. (2018), 'A new bi-based oxychloride Bi4Ti0.5W0.5O8Cl as a photocatalyst', Catalysis Letters, vol 148, no 8 , pp 2480 - 2486.
  • Feng, J., Gu, X., Liu, L., Lu, M., Ma, X., Cao, Y., Jiang, R., Wang, B. and Zhao, Q. (2018), 'Prognostic role of MicroRNA-497 in cancer patients : A meta-analysis', Journal of Cancer, vol 9, no 18 , pp 3334 - 3342.
  • Liu, M., Yuan, J., Wang, B., Wu, S., Zhang, Y., Liu, C. and Kou, H. (2018), 'Spontaneous resolution of Chiral Co(III)Dy(III) single-molecule magnet based on an achiral flexible ligand', Crystal Growth and Design, vol 18, no 12 , pp 7611 - 7617.
  • Yan, J., Xia, J., Zhang, Q., Zhang, B. and Wang, B. (2018), 'First-principles studies on the structural and electronic properties of as clusters', Materials, vol 11, no 9 .
  • Yang, X., Lu, C., Wang, X., Wang, B., Ge, G., Wang, G. and Wan, J. (2018), 'Tuning spontaneous polarization and optical absorption by intercalating Sr-Cl-layers in organic-inorganic halide perovskite CH3NH3PbI3 thin films', Journal of Materials Chemistry A, vol 6, no 36 , pp 17800 - 17806.
  • Berry, H., Wang, B. and Zhang, Q. (2018), 'The behavior of magnetic properties in the clusters of 4d transition metals', Molecules, vol 23, no 8 .
  • Meng, X., Su, W., Tao, X., Sun, M., Ying, R., Wei, W. and Wang, B. (2018), 'Oxidation prevents HMGB1 inhibition on PDGF-induced differentiation of multipotent vascular stem cells to smooth muscle cells : A possible mechanism linking oxidative stress to atherosclerosis', BioMed Research International, vol 2018 .
  • Zheng, F., Zhang, Q., Meng, Q., Wang, B., Song, F., Yunoki, S. and Wang, G. (2018), 'First-principles study of native defects in bulk Sm2CuO4 and its (001) surface structure', Journal of Applied Physics, vol 123, no 16 .
  • Tadele, K., Zhang, Q. and Wang, B. (2018), 'Formation and structural growth of two dimensional layer of hafnene on Ir (1 1 1) surface', Chemical Physics Letters, vol 712 , pp 60 - 65.
  • Xu, N., Ding, J., Wang, B. and Xu, H. (2018), 'Magnetic response in silicene, germanene, and stanene rings with ferromagnetic and antiferromagnetic exchange field', European Physical Journal B, vol 91, no 11 .
  • Berry, H., Zhang, Q. and Wang, B. (2018), 'Theoretical investigation of existence of meta-stability in iron and cobalt clusters', Solid State Communications, vol 271 , pp 44 - 50.
  • Gu, X., Feng, J., Liu, L., Lu, M., Ma, X., Cao, Y., Wang, B. and Zhao, Q. (2018), 'Association of MUC1 rs4072037 functional polymorphism and cancer risk : Evidence from 12551 cases and 13436 controls', Journal of Cancer, vol 9, no 18 , pp 3343 - 3351.
  • Meng, X., Chen, M., Su, W., Tao, X., Sun, M., Zou, X., Ying, R., Wei, W. and Wang, B. (2018), 'The differentiation of mesenchymal stem cells to vascular cells regulated by the HMGB1/RAGE axis : its application in cell therapy for transplant arteriosclerosis', Stem Cell Research and Therapy, vol 9, no 1 .
  • Zeng, S. and Wang, B. (2017), 'The effect of nonlinear elasticity on the large amplitude free vibration behavior of elastic plates at small scale', Microsystem Technologies, vol 23, no 7 , pp 2561 - 2568.
  • Wang, B. (2017), 'A finite element computational scheme for transient and nonlinear coupling thermoelectric fields and the associated thermal stresses in thermoelectric materials', Applied Thermal Engineering, vol 110 , pp 136 - 143.
  • Joseph, R., Wang, B. and Samali, B. (2017), 'Size effects on double cantilever beam fracture mechanics specimen based on strain gradient theory', Engineering Fracture Mechanics, vol 169 , pp 309 - 320.
  • Liu, Y., Wang, B. and Zhang, C. (2017), 'Thermoelastic behavior of a thermoelectric thin-film attached to an infinite elastic substrate', Philosophical Magazine, vol 97, no 1 , pp 43 - 57.
  • Xu, M., Wang, B. and Yu, A. (2017), 'Effects of surface energy on the nonlinear behaviors of laminated nanobeams', International Journal of Precision Engineering and Manufacturing: Green Technology, vol 4, no 1 , pp 105 - 111.
  • Zhang, Y. and Wang, B. (2017), 'Theoretical analysis of thermal shock resistance of ceramic foam coatings', Mechanics of Composite Materials, vol 52, no 6 , pp 773 - 780.
  • Zhang, A., Wang, B., Wang, J., Du, J. and Xie, C. (2017), 'Effect of cracking on the thermoelectric conversion efficiency of thermoelectric materials', Journal of Applied Physics, vol 121, no 4 .
  • Zhang, A., Wang, B., Wang, J. and Du, J. (2017), 'Two-dimensional problem of thermoelectric materials with an elliptic hole or a rigid inclusion', International Journal of Thermal Sciences, vol 117 , pp 184 - 195.
  • Wang, K. and Wang, B. (2017), 'Non-linear flexoelectricity in energy harvesting', International Journal of Engineering Science, vol 116 , pp 88 - 103.
  • Guo, S., Wang, B. and Nan, H. (2017), 'Coupling effects of inertia and dual-phase-lag heat conduction on thermal shock fracture of a cracked piezoelectric layer', Engineering Fracture Mechanics, vol 179 , pp 278 - 293.
  • Wang, P. and Wang, B. (2017), 'Thermoelectric fields and associated thermal stresses for an inclined elliptic hole in thermoelectric materials', International Journal of Engineering Science, vol 119 , pp 93 - 108.
  • Wang, K., Wang, B. and Zeng, S. (2017), 'Small scale effect on the pull-in instability and vibration of graphene sheets', Microsystem Technologies, vol 23, no 6 , pp 2033 - 2041.
  • Liu, Y., Wang, B. and Zhang, C. (2017), 'Mechanical model for a thermoelectric thin film bonded to an elastic infinite substrate', Mechanics of Materials, vol 114 , pp 88 - 96.
  • Zhang, R., Hou, X., Ye, C. and Wang, B. (2017), 'Enhanced mechanical and thermal properties of anisotropic fibrous porous mullite-zirconia composites produced using sol-gel impregnation', Journal of Alloys and Compounds, vol 699 , pp 511 - 516.
  • Wang, K., Wang, B. and Zhang, C. (2017), 'Surface energy and thermal stress effect on nonlinear vibration of electrostatically actuated circular micro-/nanoplates based on modified couple stress theory', Acta Mechanica, vol 228, no 1 , pp 129 - 140.
  • Zhang, A., Wang, B., Wang, J., Du, J., Xie, C. and Jin, Y. (2017), 'Thermodynamics analysis of thermoelectric materials : influence of cracking on efficiency of thermoelectric conversion', Applied Thermal Engineering, vol 127 , pp 1442 - 1450.
  • Zou, H. and Wang, B. (2017), 'Thermal effect on the dynamic error of a high-precision worktable', Archives of Civil and Mechanical Engineering, vol 17, no 2 , pp 336 - 343.
  • Wang, K., Zeng, S. and Wang, B. (2017), 'Large amplitude free vibration of electrically actuated nanobeams with surface energy and thermal effects', International Journal of Mechanical Sciences, vol 131-132 , pp 227 - 233.
  • Wang, B. and Cui, Y. (2017), 'Transient interlaminar thermal stress in multi-layered thermoelectric materials', Applied Thermal Engineering, vol 119 , pp 207 - 214.
  • Bai, Y., Zhang, Q., Luo, G., Bu, Y., Zhu, L., Fan, L. and Wang, B. (2017), 'GaS0.5Te0.5 monolayer as an efficient water splitting photocatalyst', Physical Chemistry Chemical Physics, vol 19, no 23 , pp 15394 - 15402.
  • Bai, Y., Zhang, Q., Zheng, F., Yang, Y., Meng, Q., Zhu, L. and Wang, B. (2017), 'First-principles study on codoping effect to enhance photocatalytic activity of anatase TiO2', International Journal of Modern Physics B, vol 31, no 6 .
  • Zheng, F., Zhang, Q., Meng, Q., Wang, B., Fan, L., Zhu, L., Song, F. and Wang, G. (2017), 'Electronic structures and magnetic properties of rare-earth (Sm,Gd) DOPED Bi2Se3', Chalcogenide Letters, vol 14, no 12 , pp 551 - 560.
  • Wang, K. and Wang, B. (2016), 'Nonlinear fracture mechanics analysis of nano-scale piezoelectric double cantilever beam specimens with surface effect', European Journal of Mechanics A - Solids, vol 56 , pp 12 - 18.
  • Wang, B., Guo, Y. and Zhang, C. (2016), 'Cracking and thermal shock resistance of a Bi2 Te3 based thermoelectric material', Engineering Fracture Mechanics, vol 152 , pp 1 - 9.
  • Guo, S. and Wang, B. (2016), 'Thermal shock cracking behavior of a cylinder specimen with an internal penny-shaped crack based on non-fourier heat conduction', International Journal of Thermophysics, vol 37, no 2 , pp 1 - 23.
  • Zhang, A. and Wang, B. (2016), 'Explicit solutions of an elliptic hole or a crack problem in thermoelectric materials', Engineering Fracture Mechanics, vol 151 , pp 11 - 21.
  • Wang, K. and Wang, B. (2016), 'Vibration modeling of carbon-nanotube-based biosensors incorporating thermal and nonlocal effects', Journal of Vibration and Control, vol 22, no 5 , pp 1405 - 1414.
  • Nan, H. and Wang, B. (2016), 'Nanoscale anti-plane cracking of materials with consideration of bulk and surface piezoelectricity effects', Acta Mechanica, vol 227, no 5 , pp 1445 - 1452.
  • Zhang, R., Hou, X., Ye, C., Wang, B. and Fang, D. (2016), 'Fabrication and properties of fibrous porous mullite-zirconia fiber networks with a quasi-layered structure', Journal of the European Ceramic Society, vol 36, no 14 , pp 3539 - 3544.
  • Zhang, A. and Wang, B. (2016), 'Temperature and electric potential fields of an interface crack in a layered thermoelectric or metal/thermoelectric material', International Journal of Thermal Sciences, vol 104 , pp 396 - 403.
  • Zhang, R., Qu, Q., Han, B. and Wang, B. (2016), 'A novel silica aerogel/porous Y2SiO5 ceramics with low thermal conductivity and enhanced mechanical properties prepared by freeze casting and impregnation', Materials Letters, vol 175 , pp 219 - 222.
  • Zhang, R., Ye, C., Hou, X., Li, S. and Wang, B. (2016), 'Microstructure and properties of lightweight fibrous porous mullite ceramics prepared by vacuum squeeze moulding technique', Ceramics International, vol 42, no 13 , pp 14843 - 14848.
  • Guo, S., Wang, B. and Zhang, C. (2016), 'Thermal shock fracture mechanics of a cracked solid based on the dual-phase-lag heat conduction theory considering inertia effect', Theoretical and Applied Fracture Mechanics, vol 86, no B , pp 309 - 316.
  • Wang, K. and Wang, B. (2016), 'An analytical model for nanoscale unimorph piezoelectric energy harvesters with flexoelectric effect', Composite Structures, vol 153 , pp 253 - 261.
  • Zhang, A. and Wang, B. (2016), 'Effects of crack surface electrostatic tractions on the fracture behaviour of magnetoelectric composite materials', Mechanics of Materials, vol 102 , pp 15 - 25.
  • Xu, M., Wang, B. and Yu, A. (2016), 'Effect of surface and interface energies on the nonlinear bending behaviour of nanoscale laminated thin plates', Mechanics of Composite Materials, vol 52, no 5 , pp 673 - 686.
  • Wang, K., Wang, B. and Kitamura, T. (2016), 'A review on the application of modified continuum models in modeling and simulation of nanostructures', Acta Mechanica Sinica, vol 32, no 1 , pp 83 - 100.
  • Fan, L., Chen, Y., Liu, Q., Chen, S., Zhu, L., Meng, Q., Wang, B., Zhang, Q., Ren, H. and Zou, C. (2016), 'Infrared response and optoelectronic memory device fabrication based on epitaxial VO2 film', ACS Applied Materials and Interfaces, vol 8, no 48 , pp 32971 - 32977.
  • Han, J., Shi, C., Dong, X., Wang, J., Wen, H., Wang, B. and He, Z. (2016), 'Laparoscopic abdomino-perineal resection for patients with anorectal malignant melanoma : A report of 4 cases', Journal of Biomedical Research, vol 30, no 5 , pp 436 - 440.
  • Tao, Z., Hou, G., Zhang, Q., Sang, S., Xing, F. and Wang, B. (2016), 'Characterization of Ba0.5Sr0.5Co0.7In0.1Fe0.2O3-d as the Cathode Material for Proton-conducting SOFCs', Fuel Cells, vol 16, no 2 , pp 263 - 266.
  • Xu, N., Chen, Q., Tian, H., Wang, B. and Ding, J. (2016), 'Diamagnetism in zigzag hexagonal graphene rings', Physics Letters A, vol 380, no 44843 , pp 1102 - 1104.
  • Xu, N., Wang, B. and Qiu, H. (2016), 'Theoretical research on thermoelectric properties of graphene nanorings', Journal of Donghua University (English Edition), vol 33, no 3 , pp 421 - 424.
  • Wu, D., Song, P., Fu, B., Lu, M., Zhao, Q. and Wang, B. (2016), 'Genetic polymorphisms of matrix metalloproteinase-1 is associated with the risk of cancer metastasis : an update meta-analysis', International Journal of Clinical and Experimental Medicine, vol 9, no 2 , pp 1435 - 1446.
  • Wang, K. and Wang, B. (2015), 'Timoshenko beam model for the vibration analysis of a cracked nanobeam with surface energy', Journal of Vibration and Control, vol 21, no 12 , pp 2452 - 2464.
  • Wang, K. and Wang, B. (2015), 'A general model for nano-cantilever switches with consideration of surface effects and nonlinear curvature', Physica E: Low-Dimensional Systems and Nanostructures, vol 66 , pp 197 - 208.
  • Wang, B., Li, J. and Yang, C. (2015), 'Thermal shock fracture mechanics analysis of a semi-infinite medium based on the dual-phase-lag heat conduction model', Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol 471, no 2147 .
  • Wang, K., Kitamura, T. and Wang, B. (2015), 'Nonlinear pull-in instability and free vibration of micro/nanoscale plates with surface energy : a modified couple stress theory model', International Journal of Mechanical Sciences, vol 99 , pp 288 - 296.
  • Guo, S. and Wang, B. (2015), 'Thermal shock fracture of a cylinder with a penny-shaped crack based on hyperbolic heat conduction', International Journal of Heat and Mass Transfer, vol 91 , pp 235 - 245.
  • Fang, X., Jin, H. and Wang, B. (2015), 'Dynamic interaction of two circular lined tunnels with imperfect interfaces under cylindrical P-waves', International Journal of Rock Mechanics and Mining Sciences, vol 79 , pp 172 - 182.
  • Zhang, A. and Wang, B. (2015), 'Effect of Maxwell stresses on the thermal crack tip field for piezoelectric materials', Theoretical and Applied Fracture Mechanics, vol 80, no Part B , pp 205 - 209.
  • Chang, D. and Wang, B. (2015), 'Surface thermal shock cracking of a semi-infinite medium : a nonlocal analysis', Acta Mechanica, vol 226, no 12 , pp 4139 - 4147.
  • Zou, H. and Wang, B. (2015), 'Investigation of the contact stiffness variation of linear rolling guides due to the effects of friction and wear during operation', Tribology International, vol 92 , pp 472 - 484.
  • Wang, K. and Wang, B. (2014), 'Effect of surface energy on the sensing performance of bridged nanotube-based micro-mass sensors', Journal of Intelligent Material Systems and Structures, vol 25, no 17 , pp 2177 - 2186.
  • Zhang, A. and Wang, B. (2014), 'The influence of Maxwell stresses on the fracture mechanics of piezoelectric materials', Mechanics of Materials, vol 68 , pp 64 - 69.
  • Zhang, A. and Wang, B. (2014), 'Theoretical model of crack branching in magnetoelectric thermoelastic materials', International Journal of Solids and Structures, vol 51, no 6 , pp 1340 - 1349.
  • Nan, H. and Wang, B. (2014), 'Influence of residual surface stress on the fracture of nanoscale piezoelectric materials with conducting cracks', Science China: Physics, Mechanics and Astronomy, vol 57, no 2 , pp 280 - 285.
  • Li, J. and Wang, B. (2014), 'Equivalent thermal conductivity of open-cell ceramic foams at high temperatures', International Journal of Thermophysics, vol 35, no 1 , pp 105 - 122.
  • Wang, K. and Wang, B. (2014), 'Influence of surface energy on the non-linear pull-in instability of nano-switches', International Journal of Non-Linear Mechanics, vol 59 , pp 69 - 75.
  • Chang, D. and Wang, B. (2014), 'Strength evaluation of brittle ceramics with surface defects subjected to thermal shock', Philosophical Magazine, vol 94, no 23 , pp 2633 - 2646.
  • Wang, K. and Wang, B. (2014), 'Surface effects on the energy-generating performance of piezoelectric circular nanomembrane energy harvesters under pressure loading', Europhysics Letters, vol 108, no 1 .
  • Nan, H. and Wang, B. (2014), 'Effect of interface stress on the fracture behavior of a nanoscale linear inclusion along the interface of bimaterials', International Journal of Solids and Structures, vol 51, no 23-24 , pp 4094 - 4100.
  • Yu, M., Zha, X., Ye, J. and Wang, B. (2014), 'A unified method for calculating fire resistance of solid and hollow concrete-filled steel tube columns based on average temperature', Engineering Structures, vol 71 , pp 12 - 22.
  • Zou, H. and Wang, B. (2014), 'Influence of thermal deformation of drilling machine on hole registration accuracy', Circuit World, vol 40, no 3 , pp 103 - 109.
  • Wang, F. and Wang, B. (2014), 'Current research progress in non-classical Fourier heat conduction', Applied Mechanics and Materials, vol 442 , pp 187 - 196.
  • Li, J. and Wang, B. (2014), 'Analysis of thermal shock resistance of solids based on the nonlocal elastic theory, Part II : thermal shock cracking and thermal shock resistance', WIT Transactions on Engineering Sciences, vol 87 , pp 229 - 238.
  • Li, J. and Wang, B. (2014), 'Analysis of thermal shock resistance of solids based on the nonlocal elastic theory, Part I : thermal shock stress', WIT Transactions on Engineering Sciences, vol 87 , pp 221 - 228.
  • Zhang, Y. and Wang, B. (2013), 'Thermal shock resistance analysis of a semi-infinite ceramic foam', International Journal of Engineering Science, vol 62 , pp 22 - 30.
  • Wang, B. and Wang, K. (2013), 'Vibration analysis of embedded nanotubes using nonlocal continuum theory', Composites Part B: Engineering, vol 47 , pp 96 - 101.
  • Wang, B. and Li, J. (2013), 'Hyperbolic heat conduction and associated transient thermal fracture for a piezoelectric material layer', International Journal of Solids and Structures, vol 50, no 9 , pp 1415 - 1424.
  • Chang, D. and Wang, B. (2013), 'Transient thermal elastic fracture of a piezoelectric cylinder specimen', Archive of Applied Mechanics, vol 83, no 5 , pp 709 - 721.
  • Wang, B. and Wang, K. (2013), 'Effect of surface residual stress on the fracture of double cantilever beam fracture toughness specimen', Journal of Applied Physics, vol 113, no 15 .
  • Wang, B. and Li, J. (2013), 'Thermal shock resistance of solids associated with hyperbolic heat conduction theory', Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol 469, no 2153 .
  • Wang, B. (2013), 'Transient thermal cracking associated with non-classical heat conduction in cylindrical coordinate system', Acta Mechanica Sinica, vol 29, no 2 , pp 211 - 218.
  • Zhang, A. and Wang, B. (2013), 'An opportunistic analysis of the interface crack based on the modified interface dislocation method', International Journal of Solids and Structures, vol 50, no 1 , pp 15 - 20.
  • Zhang, Y., Wang, B. and Li, J. (2013), 'The thermal shock resistance analysis of ceramic foams', Journal of the American Ceramic Society, vol 96, no 8 , pp 2615 - 2622.
  • Zhang, A. and Wang, B. (2013), 'Crack branching in thermopiezoelectric materials', International Journal of Solids and Structures, vol 50, no 19 , pp 2962 - 2969.
  • Wang, K. and Wang, B. (2013), 'Effects of surface and interface energies on the bending behavior of nanoscale multilayered beams', Physica E: Low-dimensional Systems and Nanostructures, vol 54 , pp 197 - 201.
  • Wang, B. (2013), 'Hyperbolic heat conduction for a layered medium of finite thickness with an interface crack', Applied Mechanics and Materials, vol 271-272 , pp 1312 - 1316.
  • Li, J. and Wang, B. (2013), 'Numerical modeling of elastic modulus and bucking load of honeycombs', Applied Mechanics and Materials, vol 271-272 , pp 1044 - 1048.
  • Wang, B. (2013), 'Fracture of a finite medium with a circular internal crack under hyperbolic heat conduction-prescribed crack face temperature', Advanced Materials Research, vol 716 , pp 402 - 408.
  • Wang, B. (2013), 'Fracture of a finite medium with a circular internal crack under hyperbolic heat conduction-prescribed crack face thermal flux', Advanced Materials Research, vol 706-708 , pp 1373 - 1378.
  • Wang, B. (2013), 'One-dimensional temperature and stress distributions associated with hyperbolic heat conduction', Applied Mechanics and Materials, vol 249-250 , pp 962 - 967.
  • Li, J. and Wang, B. (2013), 'Conductive and radiative heat transfer in foam materials at high temperatures', Applied Mechanics and Materials, vol 431 , pp 192 - 197.
  • Nan, H. and Wang, B. (2013), 'Effect of crack face residual surface stress on nanoscale fracture of piezoelectric materials', Engineering Fracture Mechanics, vol 110 , pp 68 - 80.
  • Zhang, A. and Wang, B. (2013), 'Applicability of the crack faces thermoelectric boundary conditions for thermopiezoelectric materials', Mechanics Research Communications, vol 52 , pp 19 - 24.
  • Wang, K. and Wang, B. (2013), 'Effect of surface energy on the non-linear postbuckling behavior of nanoplates', International Journal of Non-Linear Mechanics, vol 55 , pp 19 - 24.
  • Zou, H., Wang, B., Song, F. and Fu, L. (2013), 'The application of mineral casting in high-precision printed circuit board drilling machine', Circuit World, vol 39, no 4 , pp 204 - 211.
  • Zhang, A. and Wang, B. (2013), 'Crack tip field in thermoelectric media', Theoretical and Applied Fracture Mechanics, vol 66 , pp 33 - 36.
  • Wang, B. (2013), 'Transient electromechanical cracking of finite piezoelectric bodies', Journal of Intelligent Material Systems and Structures, vol 24, no 9 , pp 1079 - 1089.
  • Wang, K. and Wang, B. (2013), 'A finite element model for the bending and vibration of nanoscale plates with surface effect', Finite Elements in Analysis and Design, vol 74 , pp 22 - 29.
  • Wang, B., Hoffman, M. and Yu, A. (2012), 'Buckling analysis of embedded nanotubes using gradient continuum theory', Mechanics of Materials, vol 45 , pp 52 - 60.
  • Wang, K. and Wang, B. (2012), 'Effects of residual surface stress and surface elasticity on the nonlinear free vibration of nanoscale plates', Journal of Applied Physics, vol 112, no 1 .
  • Wang, B. and Han, J. (2012), 'Non-Fourier heat conduction in layered composite materials with an interface crack', International Journal of Engineering Science, vol 55 , pp 66 - 75.
  • Wang, B. and Han, J. (2012), 'A crack in a finite medium under transient non-Fourier heat conduction', International Journal of Heat and Mass Transfer, vol 55, no 17-18 , pp 4631 - 4637.
  • Wang, B., Han, J. and Sun, Y. (2012), 'A finite element/finite difference scheme for the non-classical heat conduction and associated thermal stresses', Finite Elements in Analysis and Design, vol 50 , pp 201 - 206.
  • Wang, B. and Han, J. (2012), 'Fracture mechanics associated with non-classical heat conduction in thermoelastic media', Science China: Physics, Mechanics and Astronomy, vol 55, no 3 , pp 493 - 504.
  • Wang, B. (2012), 'Fracture and effective properties of finite magnetoelectroelastic media', Journal of Intelligent Material Systems and Structures, vol 23, no 15 , pp 1699 - 1712.
  • Chang, D. and Wang, B. (2012), 'Transient thermal fracture and crack growth behavior in brittle media based on non-Fourier heat conduction', Engineering Fracture Mechanics, vol 94 , pp 29 - 36.
  • Zhang, A. and Wang, B. (2012), 'Contact zone approach for an electrically impermeable crack in piezoelectric materials under thermal-mechanical loading', Journal of Thermal Stresses, vol 35, no 9 , pp 749 - 765.
  • Nan, H. and Wang, B. (2012), 'Effect of residual surface stress on the fracture of nanoscale materials', Mechanics Research Communications, vol 44 , pp 30 - 34.
  • Wang, K. and Wang, B. (2012), 'The electromechanical coupling behavior of piezoelectric nanowires : surface and small-scale effects', Europhysics Letters, vol 97, no 6 .
  • Yang, F., Wang, G., Long, J. and Wang, B. (2012), 'Influence of surface energy on the pull-in instability of electrostatic nano-switches', Journal of Computational and Theoretical Nanoscience, vol 10, no 5 , pp 1 - 5.
  • Xu, M. and Wang, B. (2012), 'Electromechanical analysis of a beam piezoelectric transducer energy harvest device', Advanced Materials Research, vol 415-417 , pp 1114 - 1120.
  • Li, X. and Wang, B. (2012), 'Bending and fracture properties of small scale elastic beams : a nonlocal analysis', Applied Mechanics and Materials, vol 152-154 , pp 1417 - 1426.
  • Zhang, Y. and Wang, B. (2012), 'Thermal shock of semi-infinite cellular ceramics', Advanced Materials Research, vol 476-478 , pp 1041 - 1045.
  • Wang, K. and Wang, B. (2012), 'Surface effects on the buckling of piezoelectric nanobeams', Advanced Materials Research, vol 486 , pp 519 - 523.
  • Han, J. and Wang, B. (2011), 'Thermal shock resistance of ceramics with temperature-dependent material properties at elevated temperature', Acta Materialia, vol 59, no 4 , pp 1373 - 1382.
  • Wang, B., Han, J. and Du, S. (2011), 'Anti-plane mechanical and in-plane electrical fields for a finite electrode/punch on a finite piezoelectric layer', Fatigue and Fracture of Engineering Materials and Structures, vol 34, no 2 , pp 139 - 148.
  • Wang, B., Sun, Y. and Zhu, Y. (2011), 'Fracture of a finite piezoelectric layer with a penny-shaped crack', International Journal of Fracture, vol 172, no 1 , pp 19 - 39.
  • Li, X., Wang, B., Tang, G. and Lee, K. (2011), 'Size effect in transverse mechanical behavior of one-dimensional nanostructures', Physica E: Low-Dimensional Systems and Nanostructures, vol 44, no 1 , pp 207 - 214.
  • Wang, K. and Wang, B. (2011), 'Combining effects of surface energy and non-local elasticity on the buckling of nanoplates', Micro and Nano Letters, vol 6, no 11 , pp 941 - 943.
  • Chang, D. and Wang, B. (2011), 'Thermal shock resistance of brittle ceramic materials with embedded elliptical cracks', Philosophical Magazine Letters, vol 91, no 10 , pp 648 - 655.
  • Wang, K. and Wang, B. (2011), 'Vibration of nanoscale plates with surface energy via nonlocal elasticity', Physica E: Low-Dimensional Systems and Nanostructures, vol 44, no 2 , pp 448 - 453.
  • Wang, B. and Hoffman, M. (2010), 'Closed form solution for a line inclusion in magnetoelectroelastic media', International Journal of Applied Electromagnetics and Mechanics, vol 34, no 1-2 , pp 119 - 129.
  • Wang, B., Han, J. and Du, S. (2010), 'Thermal shock resistance analysis methodology of ceramic coating/metal substrate systems', Engineering Fracture Mechanics, vol 77, no 6 , pp 939 - 950.
  • Wang, B. and Han, J. (2010), 'Transverse cracking of orthotropic composite laminates : a fracture mechanics approach', Archive of Applied Mechanics, vol 80, no 11 , pp 1301 - 1316.
  • Li, X., Wang, B. and Han, J. (2010), 'A higher-order theory for static and dynamic analyses of functionally graded beams', Archive of Applied Mechanics, vol 80, no 10 , pp 1197 - 1212.
  • Wang, B. and Han, J. (2010), 'Effect of finite cracking on the electromechanical coupling properties of piezoelectric materials', International Journal of Fracture, vol 164, no 2 , pp 201 - 212.
  • Wang, B. and Han, J. (2010), 'Thermal conduction in bi-layer materials with an interfacial inclusion', Philosophical Magazine Letters, vol 90, no 4 , pp 241 - 249.
  • Wang, B., Han, J. and Du, S. (2010), 'Analysis of fiber breaking in fiber/matrix composites under torsional loads', Mechanics of Composite Materials, vol 46, no 4 , pp 365 - 374.
  • Wang, B. and Han, J. (2010), 'Effect of finite cracking on the magneto-electric coupling properties of magneto-electro-elastic composite laminates', Journal of Intelligent Material Systems and Structures, vol 21, no 16 , pp 1669 - 1679.
  • Wang, B. and Han, J. (2010), 'A finite element method for non-Fourier heat conduction in strong thermal shock environments', Frontiers of Materials Science in China, vol 4, no 3 , pp 226 - 233.
  • Wang, B., Han, J. and Du, S. (2010), 'Transient fracture of a layered magnetoelectroelastic medium', Mechanics of Materials, vol 42, no 3 , pp 354 - 364.
  • Li, G., Wang, B. and Han, J. (2010), 'Exact solution for elliptical inclusion in magnetoelectroelastic materials', International Journal of Solids and Structures, vol 47, no 3-4 , pp 419 - 426.
  • Liu, J., Wang, Y. and Wang, B. (2010), 'Propagation of shear horizontal surface waves in a layered piezoelectric half-space with an imperfect interface', IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, vol 57, no 8 , pp 1875 - 1879.
  • Wang, B. and Li, X. (2009), 'Electrode mechanics of piezoelectric materials', Science of Advanced Materials, vol 1, no 2 , pp 153 - 166.
  • Wang, B. and Niraula, O. (2009), 'Two collinear antiplane cracks in functionally graded magnetoelectroelastic composite materials', Mechanics of Composite Materials, vol 45, no 6 , pp 583 - 596.
  • Huang, G., Wang, B. and Mai, Y. (2009), 'Effect of interfacial cracks on the effective properties of magnetoelectroelastic composites', Journal of Intelligent Material Systems and Structures, vol 20, no 8 , pp 963 - 968.
  • Li, X. and Wang, B. (2009), 'Vibrational modes of Timoshenko beams at small scales', Applied Physics Letters, vol 94, no 10 .
  • Li, X., Wang, B. and Lee, K. (2009), 'Size effects of the bending stiffness of nanowires', Journal of Applied Physics, vol 105, no 7 .
  • Li, G., Wang, B., Han, J. and Du, S. (2009), 'Anti-plane analysis for elliptical inclusion in magnetoelectroelastic materials', Acta Mechanica Solida Sinica, vol 22, no 2 , pp 137 - 142.
  • Huang, G., Wang, B. and Mai, Y. (2009), 'Effective properties of magnetoelectroelastic materials with aligned ellipsoidal voids', Mechanics Research Communications, vol 36, no 5 , pp 563 - 572.
  • Wang, B., Sun, Y., Han, J. and Du, S. (2009), 'An interface electrode between two piezoelectric layers', Mechanics of Materials, vol 41, no 1 , pp 1 - 11.
  • Pan, F., Li, W., Wang, B. and Zhang, X. (2009), 'Viscoelastic fracture of multiple cracks in functionally graded materials', Computer Methods in Applied Mechanics and Engineering, vol 198, no 33-36 , pp 2643 - 2649.
  • Liu, J., Zhao, X., Soh, A. and Wang, B. (2009), 'Thickness-edge modes in a semi-infinite magneto-electro-elastic plate', Philosophical Magazine Letters, vol 89, no 3 , pp 155 - 161.
  • Wang, B., Han, J., Du, S., Zhang, H. and Sun, Y. (2008), 'Electromechanical behaviour of a finite piezoelectric layer under a flat punch', International Journal of Solids and Structures, vol 45, no 25-26 , pp 6384 - 6398.
  • Wang, B. and Mai, Y. (2008), 'An exact analysis for mode III cracks between two dissimilar magnetoelectroelastic layers', Mechanics of Composite Materials, vol 44, no 6 , pp 533 - 548.
  • Gao, C., Mai, Y. and Wang, B. (2008), 'Effects of magnetic fields on cracks in a soft ferromagnetic material', Engineering Fracture Mechanics, vol 75, no 17 , pp 4863 - 4875.
  • Wang, B., Sun, Y., Han, J. and Du, S. (2008), 'Interfacial fracture of layered magnetoelectroelastic materials', Mechanics of Composite Materials, vol 44, no 2 , pp 95 - 108.
  • Wang, B. and Sun, Y. (2008), 'A theoretical model of conductive cracks in piezoelectric materials under electromechanical cycling', Journal of Intelligent Material Systems and Structures, vol 19, no 10 , pp 1153 - 1161.
  • Wang, B., Zhang, H. and Niraula, O. (2008), 'An internal crack subjected to a thermal flow in magnetoelectroelastic solids : exact fundamental solution', Mathematics and Mechanics of Solids, vol 13, no 5 , pp 447 - 462.
  • Li, X., Wang, B. and Mai, Y. (2008), 'Effects of a surrounding elastic medium on flexural waves propagating in carbon nanotubes via nonlocal elasticity', Journal of Applied Physics, vol 103, no 7 .
  • Wang, B., Zhang, H. and Niraula, O. (2008), 'A moving screw dislocation in transversely isotropic magnetoelectroelastic materials', Philosophical Magazine Letters, vol 88, no 2 , pp 153 - 158.
  • Wang, B., Sun, Y. and Zhang, H. (2008), 'Analysis of a penny-shaped crack in magnetoelectroelastic materials', Journal of Applied Physics, vol 103, no 8 .
  • Wang, B. and Mai, Y. (2008), 'Accumulation damage mode for ferroelectric ceramics subjected to mode III fatigue loading conditions', International Journal of Damage Mechanics, vol 17, no 1 , pp 29 - 44.
  • Wang, B. and Mai, Y. (2008), 'Modeling surface electrodes on a piezoelectric layer', Journal of Applied Mechanics, vol 75, no 2 .
  • Li, W., Wang, B. and Zhang, X. (2008), 'Viscoelastic fracture of a functionally graded material strip', Chinese Journal of Theoretical and Applied Mechanics, vol 40, no 3 , pp 402 - 406.
  • Zhang, H. and Wang, B. (2008), 'Modeling multilayer piezoelectric actuators in a residual temperature field', Journal of Thermal Stresses, vol 31, no 3 , pp 246 - 259.
  • Wang, B., Sun, Y. and Zhang, H. (2008), 'Multiple cracking of fiber/matrix composites : analysis of normal extension', International Journal of Solids and Structures, vol 45, no 14-15 , pp 4032 - 4048.
  • Wang, B. and Han, J. (2007), 'Multiple cracking of magnetoelectroelastic materials in coupling thermo-electro-magneto-mechanical loading environments', Computational Materials Science, vol 39, no 2 , pp 291 - 304.
  • Wang, B. and Niraula, O. (2007), 'Transient thermal fracture analysis of transversely isotropic magneto-electro-elastic materials', Journal of Thermal Stresses, vol 30, no 3 , pp 297 - 317.
  • Wang, B. and Han, J. (2007), 'Fracture of a finite piezoelectric strip with a crack vertical to its borders : an exact analysis and its applications', International Journal of Applied Electromagnetics and Mechanics, vol 26, no 1-2 , pp 87 - 99.
  • Wang, B. and Han, J. (2007), 'Multiple surface cracking of a piezoelectric layer bonded to an elastic substrate under dynamic anti-plane electromechanical impacts', Journal of Intelligent Material Systems and Structures, vol 18, no 11 , pp 1203 - 1213.
  • Wang, B. and Mai, Y. (2007), 'Investigation of a mode III crack in functionally graded magnetoelectroelastic materials', Key Engineering Materials, vol 348-349 , pp 713 - 716.
  • Wang, B., Zhang, H. and Han, J. (2007), 'A periodic array of cracks in a transversely isotropic magnetoelectroelastic material', Archive of Applied Mechanics, vol 77, no 8 , pp 541 - 558.
  • Wang, B. and Mai, Y. (2007), 'Applicability of the crack-face electromagnetic boundary conditions for fracture of magnetoelectroelastic materials', International Journal of Solids and Structures, vol 44, no 2 , pp 387 - 398.
  • Wang, B. and Mai, Y. (2007), 'Self-consistent analysis of coupled magnetoelectroelastic fracture - theoretical investigation and finite element verification', Computer Methods in Applied Mechanics and Engineering, vol 196, no 13-16 , pp 2044 - 2054.
  • Wang, B. and Mai, Y. (2007), 'Exact and fundamental solution for an anti-plane crack vertical to the boundaries of a magnetoelectroelastic strip', International Journal of Damage Mechanics, vol 16, no 1 , pp 77 - 94.
  • Wang, B. and Zhang, H. (2007), 'Analysis of multiple cracks in laminate composites under anti-plane static loads', Fatigue and Fracture of Engineering Materials and Structures, vol 30, no 4 , pp 294 - 300.
  • Wang, B., Mai, Y. and Niraula, O. (2007), 'A horizontal shear surface wave in magnetoelectroelastic materials', Philosophical Magazine Letters, vol 87, no 1 , pp 53 - 58.
  • Wang, B. and Han, J. (2007), 'An accumulation damage model for fatigue fracture of ferroelectric ceramics', Engineering Fracture Mechanics, vol 74, no 9 , pp 1456 - 1467.
  • Wang, B. and Han, J. (2007), 'An analytical model for electrode-ceramic interaction in multilayer piezoelectric actuators', Acta Mechanica Sinica, vol 23, no 2 , pp 199 - 208.
  • Wang, B. and Han, J. (2007), 'Multiple surface cracking of elastic coatings subjected to dynamic load', Mechanics of Materials, vol 39, no 5 , pp 445 - 457.
  • Wang, B. and Mai, Y. (2007), 'On thermal shock behavior of functionally graded materials', Journal of Thermal Stresses, vol 30, no 6 , pp 523 - 558.
  • Wang, B. and Mai, Y. (2007), 'Multiple surface cracks in a piezoelectric layer bonded to an elastic substrate under transient electromechanical loads', Mechanics of Materials, vol 39, no 6 , pp 564 - 579.
  • Li, X. and Wang, B. (2007), 'Anti-plane shear crack normal to and terminating at the interface of two bonded piezoelectric ceramics', International Journal of Solids and Structures, vol 44, no 11-12 , pp 3796 - 3810.
  • Wang, B. and Han, J. (2006), 'Discussion on electromagnetic crack face boundary conditions for the fracture mechanics of magneto-electro-elastic materials', Acta Mechanica Sinica, vol 22, no 3 , pp 233 - 242.
  • Han, J. and Wang, B. (2006), 'Thermal shock resistance enhancement of functionally graded materials by multiple cracking', Acta Materialia, vol 54, no 4 , pp 963 - 973.
  • Wang, B. and Han, J. (2006), 'Fracture of a piezoelectric fiber/elastic matrix composite', Mechanics of Composite Materials, vol 42, no 3 , pp 209 - 222.
  • Wang, B. and Mai, Y. (2006), 'A periodic array of cracks in functionally graded materials subjected to transient loading', International Journal of Engineering Science, vol 44, no 5-6 , pp 351 - 364.
  • Wang, B. and Mai, Y. (2006), 'Time-dependent piezoelectric fracture behavior of conducting cracks and electrodes', International Journal of Applied Mechanics and Engineering, vol 11, no 1 , pp 179 - 194.
  • Wang, B. and Mai, Y. (2006), 'Periodic antiplane cracks in graded coatings under static or transient loading', Journal of Applied Mechanics, vol 73, no 1 , pp 134 - 142.
  • Wang, B. and Han, J. (2006), 'Multiple cracking of elastic coatings under transient thermal load', Archive of Applied Mechanics, vol 75, no 6-7 , pp 412 - 424.
  • Wang, B., Han, J. and Mai, Y. (2006), 'Mode III fracture of a magnetoelectroelastic layer : exact solution and discussion of the crack face electromagnetic boundary conditions', International Journal of Fracture, vol 139, no 1 , pp 27 - 38.
  • Wang, B. and Mai, Y. (2006), 'Closed-form solution for an antiplane interface crack between two dissimilar magnetoelectroelastic layers', Journal of Applied Mechanics, vol 73, no 2 , pp 281 - 290.
  • Wang, B. and Han, J. (2006), 'A moving crack in a nonhomogeneous material strip', Acta Mechanica Solida Sinica, vol 19, no 3 , pp 223 - 230.
  • Wang, B., Han, J. and Mai, Y. (2006), 'Exact solution for mode III cracks in a magnetoelectroelastic layer', International Journal of Applied Electromagnetics and Mechanics, vol 24, no 1-2 , pp 33 - 44.
  • Wang, B. and Mai, Y. (2006), 'Near-tip fields for penny-shaped cracks in magnetoelectroelastic media', Key Engineering Materials, vol 312 , pp 41 - 46.
  • Wang, B. and Han, J. (2006), 'A circular indenter on a piezoelectric layer', Archive of Applied Mechanics, vol 76, no 7-8 , pp 367 - 379.
  • Wang, B. and Han, J. (2006), 'A mode III moving crack between a functionally graded coating and a homogeneous substrate', Journal of Mechanics of Materials and Structures, vol 1, no 4 , pp 649 - 661.
  • Han, J. and Wang, B. (2006), 'Crack spacing effect for a piezoelectric cylinder under electro-mechanical loading or transient heating', International Journal of Solids and Structures, vol 43, no 7-8 , pp 2126 - 2145.
  • Niraula, O. and Wang, B. (2006), 'Thermal stress analysis in magneto-electro-thermo-elasticity with a penny-shaped crack under uniform heat flow', Journal of Thermal Stresses, vol 29, no 5 , pp 423 - 437.
  • Han, J. and Wang, B. (2006), 'Functionally graded materials with periodic internal cracks subjected to transient loading', Key Engineering Materials, vol 312 , pp 47 - 52.
  • Niraula, O. and Wang, B. (2006), 'A magneto-electro-elastic material with a penny-shaped crack subjected to temperature loading', Acta Mechanica, vol 187, no 1-4 , pp 151 - 168.
  • Wang, B. and Tian, Z. (2005), 'Application of finite element-finite difference method to the determination of transient temperature field in functionally graded materials', Finite Elements in Analysis and Design, vol 41, no 4 , pp 335 - 349.
  • Wang, B. and Mai, Y. (2005), 'An electrode analysis for multilayer ceramic actuators', Sensors and Actuators A: Physical, vol 121, no 1 , pp 203 - 212.
  • Wang, B. and Li, J. (2005), 'Thermal stress and intensity release in ferroelectric materials by multiple cracking', Acta Materialia, vol 53, no 3 , pp 785 - 799.
  • Wang, B. (2005), 'Transient thermal fracture of a piezoelectric cylinder', Journal of Thermal Stresses, vol 28, no 2 , pp 197 - 212.
  • Wang, B. (2005), 'A partially broken piezoelectric fiber in an elastic matrix', Multidiscipline Modeling in Materials and Structures, vol 1, no 4 , pp 293 - 314.
  • Wang, B. and Mai, Y. (2005), 'A periodic array of cracks in functional graded materials subjected to thermo-mechanical loading', International Journal of Engineering Science, vol 43, no 5-6 , pp 432 - 446.
  • Wang, B. and Zhang, X. (2005), 'Fracture prediction for piezoelectric ceramics based on the electric field saturation concept', Mechanics Research Communications, vol 32, no 4 , pp 411 - 419.
  • Wang, B., Mai, Y. and Zhang, X. (2005), 'Functionally graded materials under severe thermal environments', Journal of the American Ceramic Society, vol 88, no 3 , pp 683 - 690.
  • Wang, B. and Mai, Y. (2005), 'Transient one-dimensional heat conduction problems solved by finite element', International Journal of Mechanical Sciences, vol 47, no 2 , pp 303 - 317.
  • Han, J. and Wang, B. (2005), 'Electromechanical model of periodic cracks in piezoelectric materials', Mechanics of Materials, vol 37, no 12 , pp 1180 - 1197.
  • Wang, B. and Zhang, X. (2004), 'A mode III crack in a functionally graded piezoelectric material strip', Journal of Applied Mechanics, vol 71, no 3 , pp 327 - 333.
  • Wang, B. and Sun, Y. (2004), 'Out-of-plane interface cracks in dissimilar piezoelectric materials', Archive of Applied Mechanics, vol 74, no 1-2 , pp 2 - 15.
  • Wang, B., Han, J. and Du, S. (2004), 'Applicability of the crack face electrical boundary conditions in piezoelectric mechanics', Acta Mechanica Solida Sinica, vol 17, no 4 , pp 290 - 296.
  • Wang, B. and Zhang, X. (2004), 'An electrical field based non-linear model in the fracture of piezoelectric ceramics', International Journal of Solids and Structures, vol 41, no 16-17 , pp 4337 - 4347.
  • Wang, B. and Sun, Y. (2004), 'Intensity factors for some common piezoelectric fracture mechanics specimens with conducting cracks or electrodes', International Journal of Engineering Science, vol 42, no 11-12 , pp 1129 - 1153.
  • Wang, B. and Noda, N. (2004), 'Exact thermoelectroelasticity solution for a penny-shaped crack in piezoelectric materials', Journal of Thermal Stresses, vol 27, no 3 , pp 241 - 251.
  • Wang, B., Mai, Y. and Noda, N. (2004), 'Fracture mechanics analysis models for functionally graded materials with arbitrarily distributed properties (modes II and III problems)', International Journal of Fracture, vol 126, no 4 , pp 307 - 320.
  • Wang, B., Mai, Y. and Zhang, X. (2004), 'Thermal shock resistance of functionally graded materials', Acta Materialia, vol 52, no 17 , pp 4961 - 4972.
  • Wang, B. and Mai, Y. (2004), 'Fracture of piezoelectromagnetic materials', Mechanics Research Communications, vol 31, no 1 , pp 65 - 73.
  • Wang, B. (2004), 'Circular surface electrode on a piezoelectric layer', Journal of Applied Physics, vol 95, no 8 , pp 4267 - 4274.
  • Wang, B. (2004), 'Exact electroelastic solutions for penny-shaped cracks under prescribed temperature or thermal flow', Applied Physics Letters, vol 85, no 14 , pp 2800 - 2802.
  • Wang, B. and Sun, Y. (2004), 'Thermal shock strength of a semi-infinite piezoelectric medium', Journal of Engineering Materials and Technology, vol 126, no 4 , pp 450 - 456.
  • Wang, B. and Mai, Y. (2004), 'Surface fracture of a semi-infinite piezoelectric medium under transient thermal loading (poling axis parallel to the edge of the medium)', Mechanics of Materials, vol 36, no 3 , pp 215 - 223.
  • Wang, B. and Mai, Y. (2004), 'Impermeable crack and permeable crack assumptions, which one is more realistic?', Journal of Applied Mechanics, vol 71, no 4 , pp 575 - 578.
  • Wang, B. and Mai, Y. (2004), 'Strength evaluation of piezoelectric ceramics under transient thermal environments', Journal of the American Ceramic Society, vol 87, no 5 , pp 929 - 936.
  • Wang, B., Mai, Y., Zhang, X. and Han, J. (2003), 'Surface cracking of functionally graded materials with arbitrarily distributed properties', Materials Science Forum, vol 423-425 , pp 635 - 640.
  • Wang, B. and Mai, Y. (2003), 'Thermal shock fracture of piezoelectric materials', Philosophical Magazine, vol 83, no 5 , pp 631 - 657.
  • Wang, B., Mai, Y. and Sun, Y. (2003), 'Anti-plane fracture of a functionally graded material strip', European Journal of Mechanics A - Solids, vol 22, no 3 , pp 357 - 368.
  • Wang, B. and Mai, Y. (2003), 'Cracking of electromagnetic elastic solids', Key Engineering Materials, vol 251-252 , pp 303 - 312.
  • Wang, B. and Mai, Y. (2003), 'On the electrical boundary conditions on the crack surfaces in piezoelectric ceramics', International Journal of Engineering Science, vol 41, no 6 , pp 633 - 652.
  • Wang, B. and Mai, Y. (2003), 'Crack tip field in piezoelectric/piezomagnetic media', European Journal of Mechanics A - Solids, vol 22, no 4 , pp 591 - 602.
  • Wang, B. (2003), 'A mode III crack in functionally graded piezoelectric materials', Mechanics Research Communications, vol 30, no 2 , pp 151 - 159.
  • Wang, B., Mai, Y. and Sun, Y. (2003), 'Surface cracking of a piezoelectric strip bonded to an elastic substrate (mode I crack problem)', Archive of Applied Mechanics, vol 73, no 5-6 , pp 434 - 447.
  • Wang, B. and Noda, N. (2003), 'Thermally loaded functionally graded materials with embedded defects', Journal of Thermal Stresses, vol 26, no 1 , pp 25 - 39.
  • Wang, B. and Mai, Y. (2002), 'A cracked piezoelectric material strip under transient thermal loading', Journal of Applied Mechanics, vol 69, no 4 , pp 539 - 546.
  • Wang, B. and Noda, N. (2002), 'Generalized plane problem of a cracked piezoelectric layer bonded to dissimilar layers', Acta Mechanica, vol 153, no 1-2 , pp 79 - 88.
  • Wang, B., Noda, N., Han, J. and Du, S. (2002), 'Surface thermal shock fracture of a semi-infinite piezoelectric medium (poling axis parallel to the crack plane)', Mechanics of Materials, vol 34, no 3 , pp 135 - 144.
  • Wang, B. and Mai, Y. (2002), 'A piezoelectric material strip with a crack perpendicular to its boundary surfaces', International Journal of Solids and Structures, vol 39, no 17 , pp 4501 - 4524.
  • Wang, B., Mai, Y. and Noda, N. (2002), 'Fracture mechanics analysis model for functionally graded materials with arbitrarily distributed properties', International Journal of Fracture, vol 116, no 2 , pp 161 - 177.
  • Wang, B. and Mai, Y. (2002), 'Fracture of a piezoelectric material layer bonded by two elastic layers', International Journal of Engineering Science, vol 40, no 15 , pp 1697 - 1727.
  • Noda, N. and Wang, B. (2002), 'Transient thermoelastic responses of functionally graded materials containing collinear cracks', Engineering Fracture Mechanics, vol 69, no 14-16 , pp 1791 - 1809.
  • Zhang, X., Wang, B. and Han, J. (2002), 'Coupled thermal/mechanical analysis for the fracture of functionally graded materials under transient thermal loading', Acta Mechanica Solida Sinica, vol 15, no 2 .
  • Noda, N. and Wang, B. (2002), 'The collinear cracks in an inhomogeneous medium subjected to transient load', Acta Mechanica, vol 153, no 1-2 , pp 1 - 13.
  • Wang, B. and Noda, N. (2001), 'Fracture of a piezoelectric material strip under steady state thermal load', Journal of Thermal Stresses, vol 24, no 3 , pp 281 - 299.
  • Wang, B. and Noda, N. (2001), 'Axisymmetric deformation of piezoelectric multilayers', Philosophical Magazine A, vol 81, no 4 , pp 1009 - 1019.
  • Wang, B. and Noda, N. (2001), 'Transient loaded smart laminate with two piezoelectric layers bonded to an elastic layer', Engineering Fracture Mechanics, vol 68, no 8 , pp 1003 - 1012.
  • Wang, B. and Noda, N. (2001), 'Design of a smart functionally graded thermopiezoelectric composite structure', Smart Materials and Structures, vol 10, no 2 , pp 189 - 193.
  • Wang, B. and Noda, N. (2001), 'Thermally induced fracture of a smart functionally graded composite structure', Theoretical and Applied Fracture Mechanics, vol 35, no 2 , pp 93 - 109.
  • Wang, B., Noda, N., Han, J. and Du, S. (2001), 'A penny-shaped crack in a transversely isotropic piezoelectric layer', European Journal of Mechanics A - Solids, vol 20, no 6 , pp 997 - 1005.
  • Wang, B. and Noda, N. (2001), 'A crack in a piezoelectric layer bonded to a dissimilar elastic layer under transient load', Archives of Applied Mechanics, vol 71, no 6-7 , pp 487 - 494.
  • Wang, B., Han, J. and Du, S. (2000), 'Cracks problem for non-homogeneous composite material subjected to dynamic loading', International Journal of Solids and Structures, vol 37, no 9 , pp 1251 - 1274.
  • Wang, B. and Noda, N. (2000), 'A cracked piezoelectric material under generalized plane electromechanical impact', Archives of Mechanics, vol 52, no 6 , pp 933 - 948.
  • Wang, B., Han, J. and Du, S. (2000), 'Crack problems for functionally graded materials under transient thermal loading', Journal of Thermal Stresses, vol 23, no 2 , pp 143 - 168.
  • Wang, B., Han, J. and Du, S. (2000), 'New considerations for the fracture of piezoelectric materials under electromechanical loading', Mechanics Research Communications, vol 27, no 4 , pp 435 - 444.
  • Wang, B., Han, J. and Du, S. (2000), 'Thermoelastic fracture mechanics for nonhomogeneous material subjected to unsteady thermal load', Journal of Applied Mechanics, vol 67, no 1 , pp 87 - 95.
  • Wang, B. and Noda, N. (2000), 'Mixed mode crack initiation in piezoelectric ceramic strip', Theoretical and Applied Fracture Mechanics, vol 34, no 1 , pp 35 - 47.
  • Wang, B., Han, J. and Du, S. (2000), 'Fracture mechanics for multilayers with penny-shaped cracks subjected to dynamic torsional loading', International Journal of Engineering Science, vol 38, no 8 , pp 893 - 901.
  • Wang, B., Han, J. and Du, S. (2000), 'Electroelastic fracture dynamics for multilayered piezoelectric materials under dynamic anti-plane shearing', International Journal of Solids and Structures, vol 37, no 38 , pp 5219 - 5231.
  • Wang, B., Han, J. and Du, S. (1999), 'Functionally graded penny-shaped cracks under dynamic loading', Theoretical and Applied Fracture Mechanics, vol 32, no 3 , pp 165 - 175.
  • Wang, B., Han, J. and Du, S. (1999), 'Multiple crack problem in nonhomogeneous composite materials subjected to dynamic anti-plane shearing', International Journal of Fracture, vol 100, no 4 , pp 343 - 353.
  • Wang, B., Han, J. and Du, S. (1999), 'Dynamic response for functionally graded materials with penny-shaped cracks', Acta Mechanica Solida Sinica, vol 12, no 2 , pp 106 - 113.
  • Wang, B., Han, J. and Du, S. (1998), 'Dynamic response for non-homogeneous piezoelectric medium with multiple cracks', Engineering Fracture Mechanics, vol 61, no 5-6 , pp 607 - 617.
  • Wang, B., Han, J. and Du, S. (1998), 'Dynamic fracture mechanics analysis for composite materials with material nonhomogeneity along thickness direction', Acta Mechanica Solida Sinica, vol 11, no 1 , pp 84 - 93.

Conference Papers

  • Veerappan , V., Majji, R., Zhang, Y., Wang, B. and Yang, C. (2021), 'Numerical modelling of additive manufacturing process for stainless steel tension testing samples', Australasian Conference on Computational Mechanics, Sydney, N.S.W..
  • Zhang, Y., Wang, B. and Shang, Y. (2020), 'Fracture considerations for the thermal shock resistance of porous ceramic materials', International Workshop on Renewable Energy and Development, Sanya, China.
  • Tang, Z., Zha, X. and Wang, B. (2019), 'Finite element study on shear performances of in-filled bolt joint of assembled grc wall with light steel skeleton frame', International Workshop on Renewable Energy and Development, Guangzhou, China.
  • Tang, Z., Zha, X. and Wang, B. (2019), 'Finite element study on mechanical performances of multi-span metal faced sandwich panels under temperature actions', International Workshop on Renewable Energy and Development, Guangzhou, China.
  • Tang, Z., Zha, X. and Wang, B. (2019), 'Finite element study on bearing capacities of hook-bolt joint of assembled GRC wall with light steel skeleton frame', International Conference on Energy Equipment Science and Engineering, Xi'an, China.
  • Wang, F., Wang, B., Shan, X. and Qian, F. (2015), 'Application of finite element method to the dual-phase lagging heat conduction model', International Conference on Mechanics and Mechatronics, Changsha, China.
  • Wang, B. and Han, J. (2006), 'A nonhomogeneous piezoelectric material plate with a moving crack', International Conference on Fracture and Damage Mechanics, Harbin, China.

Previous Projects

Title: Development of durable and resilient bridge columns through use of emerging materials
Funder:
  • University of Western Sydney
  • Shenzhen City Bridge Bo Design Institute Co Ltd
  • Shanxi Transportation Research Institute
Western Researchers: Zhong Tao, Bijan Samali and Baolin Wang
Years: 2015-07-23 - 2018-04-27
ID: P00022808

Western Sydney University

Locked Bag 1797
Penrith NSW 2751

ABN 53 014 069 881
CRICOS Provider No: 00917k