2016 Publications


Centre for Infrastructure Engineering Publications

2016

TitlePublicationAuthors
Finite element simulation of an excavation-triggered landslide using large deformation theory Engineering Geology
Vol. 205, pp. 62-72
Mohammadi, Samaneh; Taiebat, Hossein A.
Performance of steel-reinforced concrete column after exposure to fire : FEA model and experiments Journal of Structural Engineering
Vol. 142, Issue 9, No. 04016055
Han, Lin-Hai; Zhou, Kan; Tan, Qing-Hua; Song, Tian-Yi
Seismic analysis of roller compacted concrete (RCC) dams considering effect of sizes and shapes of galleries KSCE Journal of Civil Engineering
Vol. 20, Issue 1, pp. 261-272
Ghaedi, Khaled; Jameel, Mohammed; Ibrahim, Zainah; Khanzaei, Parveen
Detection of surface crack in concrete using measurement technique with laser displacement sensor IEEE Transactions on Instrumentation and Measurement
Vol.65, Issue 8, pp. 1951-1953
Giri, Paritosh; Kharkovsky, Sergey N.
Optimal placement of active braces by using PSO algorithm in near- and far-field earthquakes International Journal of Advanced Structural Engineering
Vol. 8, Issue 1, pp. 29-44
Mastali, Mohammad; Kheyroddin, Ali; Samali, Bijan; Vahdani, Reza
Dynamic stiffness method for free vibration of moderately thick functionally graded plates Mechanics of Advanced Composite Structures
Vol. 3, Issue 1, pp. 15-30
Soltani, M.; Hatami, Shahab; Azhari, Mojtaba; Ronagh, Hamid R.
In vitro antibacterial biofilm effect of magnesium oxide nanoparticles on Streptococcus mutans Micro and Nano Biomedicine
Vol. 1, Issue 1, No. 30013, pp. 21-27
Haghshenas, Leila; Amini, Abbas; Bhatti, Adnan B.; Rahimi, Ghasem
Simulation of multipass hot rolling for 7050 aluminum alloys Applied Mechanics and Materials
Vol. 846, pp. 145-150
An, Yang; Hodgson, Peter D.; Yang, Chunhui
Investigation of the optimal semi-active control strategies of adjacent buildings connected with magnetorheological dampers International Journal of Optimization in Civil Engineering
Vol. 6, Issue 4, pp. 523-547
Uz, Mehmet E.; Sharafi, Pezhman
Effect of surface and interface energies on the nonlinear bending behaviour of nanoscale laminated thin plates Mechanics of Composite Materials
Vol. 52, Issue 5, pp. 673-686
Xu, M.; Wang, Baolin; Yu, Aibing
A finite element computational scheme for transient and nonlinear coupling thermoelectric fields and the associated thermal stresses in thermoelectric materials Applied Thermal Engineering
Vol. 110, pp. 136-143
Wang, Baolin
Optimum spanning for rectangular floor systems – part 2 : an algorithm and practical applications Australian Journal of Civil Engineering
Vol. 14, Issue 2, pp. 106-113
Sharafi, Pezhman; Rashidi, Maria
Microwave and millimetre wave antipodal Vivaldi antenna with trapezoid-shaped dielectric lens for imaging of construction materials IET Microwaves, Antennas and Propagation
Vol. 10, Issue 3, pp. 301-309
Moosa Zadeh, Mahdi; Kharkovsky, Sergey N.; Case, Joseph T.
Development of statistical design models for concrete sandwich panels with continuous glass-fiber-reinforced polymer shear connectors Advances in Structural Engineering
Vol. 19, Issue 2
Kang, Won-Hee; Kim, Junhee
Construction material mountable UHF RFID tag antenna Microwave and Optical Technology Letters
Vol. 58, Issue 9, pp. 2231-2237
Jayawardana, Devaka; Kharkovsky, Sergey N.; Liyanapathirana, Ranjith
Voronoi analysis of the packings of non-spherical particles Chemical Engineering Science
Vol. 153, pp. 330-343
Dong, Kejun; Wang, Chuncheng; Yu, Aibing
The properties of fly ash based geopolymer mortars made with dune sand Proceedings of the 6th International Composites Conference (ACUN-6): Composite & Nanocomposites in Civil, Offshore and Mining Infrastructure
pp. 399-404
Chuah, Samuel; Duan, Wenhui; Pan, Zhu; Hunter, E.; Korayem, Asghar H.; Zhao, Xiao-Ling; Collins, Frank G.; Sanjayan, Jay G
Thermal shock cracking behavior of a cylinder specimen with an internal penny-shaped crack based on non-fourier heat conduction International Journal of Thermophysics
Vol. 37, Issue 2, No. 17, pp. 1-23
Guo, Songlin; Wang, Baolin
Dynamic field monitoring data analysis of an ancient wooden building in seismic and operational environments Earthquakes and Structures
Vol. 11, Issue 6, pp. 1043-1060
Lyu, Mengning; Zhu, Xinqun; Yang, Qingshan
Enhanced performance of wind energy harvester by aerodynamic treatment of a square prism Applied Physics Letters
Vol. 108, No. 123901
Author  Hu, Gang; Tse, Kam-Tim; Kwok, Kenny C. S.
Reducing the effect of wave dispersion in a timber pole based on transversely isotropic material modelling Construction and Building Materials
Vol. 102, Issue 2, pp. 985-998
Subhani, Mahbube; Li, Jianchun; Samali, Bijan; Crews, Keith I.
A compact self-adaptive recursive least square approach for real-time structural identification with unknown inputs Advances in Structural Engineering
Vol. 19, Issue 7, pp. 1118-1129
Askari, Mohsen; Li, Jianchun; Samali, Bijan
Cooling rate dependence of solidification for liquid aluminium : a large-scale molecular dynamics simulation study Physical Chemistry Chemical Physics
Vol. 18, Issue 26, pp. 17461-17469
Hou, Zhaoyang; Dong, Kejun; Tian, Zean; Liu, Rangsu; Wang, Zhen; Wang, Jianguo
Effects of applied environmental conditions on the pull-out strengths of CFRP-concrete bond Construction and Building Materials
Vol. 114, pp. 817-830
Kabir, Muhammad I.; Shrestha, Rijun; Samali, Bijan
Bolted and welded connectors for the rehabilitation of composite beams Journal of Constructional Steel Research
Vol. 125, pp. 61-73
Pathirana, Sameera W.; Uy, Brian; Mirza, Olivia; Zhu, Xinqun
Evaluation of phosphorus adsorption capacity of various filter materials from aqueous solution Adsorption Science and Technology
Vol. 34, Issue 4-5, pp. 320-330
Adhikari, Rekha A.; KC, Bal Krishna; Sarukkalige, Ranjan
Non-contact inspection of construction materials using 3-axis multifunctional imaging system with microwave and laser sensing techniques IEEE Instrumentation & Measurement Magazine
Vol. 19, Issue 2, pp. 6-12
Kharkovsky, Sergey N.; Giri, Paritosh; Samali, Bijan
Wake-induced vibration of a small cylinder in the wake of a large cylinder Ocean Engineering
Vol. 113, pp. 75-89
Zhao, Ming; Cui, Zhendong; Kwok, Kenny C. S.; Zhang, Yu
Effects of crack surface electrostatic tractions on the fracture behaviour of magnetoelectric composite materials Mechanics of Materials
Vol. 102, pp. 15-25
Zhang, Aibing; Wang, Baolin
Explicit solutions of an elliptic hole or a crack problem in thermoelectric materials Engineering Fracture Mechanics
Vol. 151, pp. 11-21
Zhang, Aibing; Wang, Baolin
System reliability evaluation of steel frames with semi-rigid connections Journal of Constructional Steel Research
Vol. 121, pp. 29-39
Thai, Huu-Tai; Uy, Brian; Kang, Won-Hee; Hicks, Stephen
CFD simulation of the effect of an upstream building on the inter-unit dispersion in a multi-story building in two wind directions Journal of Wind Engineering and Industrial Aerodynamics
Vol. 150, pp. 31-41
Cui, Dong J.; Mak, Cheuk M.; Kwok, Kenny C. S.; Ai, Zheng Tao, Zhong
Evaluation of sustainable technologies that upgrade the binder performance grade in asphalt pavement construction Materials and Design
Vol. 95, pp. 9-20
Jamshidi, Ali; Hamzah, Meor O.; Kurumisawa, Kiyofumi; Nawa, Toyoharu; Samali, Bijan
Psychological climate in occupational safety and health : the safety awareness of construction workers in South China International Journal of Construction Management
Vol. 16, Issue 4, pp. 315-325
Fung, Ivan W.; Tam, Vivian W. Y.; Sing, Michael C.; Tang, K. K. W.; Ogunlana, Stephen O.
Vibration modeling of carbon-nanotube-based biosensors incorporating thermal and nonlocal effects Journal of Vibration and Control
Vol. 22, issue 5, pp. 1405-1414
Wang, Kaifa; Wang, Baolin
Occupant response to wind-excited buildings : a multidisciplinary perspective Proceedings of the Institution of Civil Engineers: Structures and Buildings
Vol. 169, Issue 8, pp. 625-634
Lamb, Steven; Macefield, Vaughan G.; Walton, Darren; Kwok, Kenny C. S.
Separation of longitudinal and flexural wave in a cylindrical structure based on sensor arrangement for non-destructive evaluation Journal of Civil Structural Health Monitoring
Vol. 6, Issue 3, pp. 411-427
Subhani, Mahbube; Li, Jianchun; Samali, Bijan
Fabrication and properties of fibrous porous mullite–zirconia fiber networks with a quasi-layered structure Journal of the European Ceramic Society
Vol. 36, Issue 14, pp. 3539-3544
Zhang, Rubing; Hou, Xiaobo; Ye, Changshou; Wang, Baolin; Fang, Daining
In situ elevated temperature testing of fly ash based geopolymer composites Materials
Vol. 9, Issue 6, No. 445
Vickers, Les; Pan, Zhu; Tao, Zhong; Riessen, Arie van
Experimental and numerical investigation of concrete-filled stainless steel columns exposed to fire Journal of Constructional Steel Research
Vol. 118, pp. 120-134
Tao, Zhong; Ghannam, Mohamed; Song, Tian-Yi; Han, Lin-Hai
Bond behavior in concrete-filled steel tubes Journal of Constructional Steel Research
Vol. 120, pp. 81-93
Tao, Zhong; Song, Tian-Yi; Uy, Brian; Han, Lin-Hai
Experimental forward and inverse modelling of magnetorheological dampers using an optimal Takagi-Sugeno-Kang fuzzy scheme Journal of Intelligent Material Systems and Structures
Vol. 27, Issue 7, p. 904-914
Askari, Mohsen; Li, Jianchun; Samali, Bijan; Gu, Xiaoyu
Nonlinear fracture mechanics analysis of nano-scale piezoelectric double cantilever beam specimens with surface effect European Journal of Mechanics A - Solids
Vol. 56, pp. 12-18
Wang, Kaifa; Wang, Baolin
Semi-active control of smart building-MR damper systems using novel TSK-Inv and max-min algorithms Smart Structures and Systems
Vol. 18, Issue 5, pp. 1005-1028
Askari, Mohsen; Li, Jianchun; Samali, Bijan
Productivity study of the scaffolding operations in liquefied natural gas plant construction : Ichthys Project in Darwin, Northern Territory, Australia Journal of Professional Issues in Engineering Education and Practice
Vol. 142, Issue 4
Moon, Sungkon; Forlani, John; Wang, Xiangyu; Tam, Vivian W. Y.
Simulation of twisted wind flows in a boundary layer wind tunnel for pedestrian-level wind tunnel tests Journal of Wind Engineering and Industrial Aerodynamics
Vol. 159, pp. 99-109
Tse, Kam-Tim; Weerasuriya, Asiri U.; Kwok, Kenny C. S.
A longitudinal investigation of work environment stressors on the performance and wellbeing of office workers Applied Ergonomics
Vol. 52, pp. 104-111
Lamb, Steven; Kwok, Kenny C. S.
Performance of concrete made with steel slag and waste glass Construction and Building Materials
Vol. 114, pp. 737-746
Yu, Xin; Tao, Zhong; Song, Tian-Yi; Pan, Zhu
An updated analytical structural pounding force model based on viscoelasticity of materials Shock and Vibration
Vol. 2016, No. 2596923
Xue, Qichao; Zhang, Chunwei; He, Jian; Zou, Guangping; Zhang, Jingcai
Evaluation of climate change impacts on rainwater harvesting Journal of Cleaner Production
Vol. 137, pp. 60-69
Haque, Md. Mahmudul; Rahman, Ataur; Samali, Bijan
Comparative study of ground water treatment plants sludges to remove phosphorous from wastewater Journal of Environmental Management
Vol. 180, pp. 17-23
KC, Bal Krishna; Aryal, Ashok; Jansen, Troy
A case study on the soil–pile–structure interaction of a long span arched structure Structure and Infrastructure Engineering: Maintenance, Management, Life-Cycle Design and Performance
Vol. 12, Issue 12, pp. 1614-1633
Kildashti, Kamyar; Dolatshahi, Kiarash M.; Mirghaderi, Rasoul
Computational investigation of the effect of particle density on the multiphase flows and performance of hydrocyclone Minerals Engineering
Vol. 90, pp. 55-69
Ghodrat, Maryam; Qi, Zheng; Kuang, Shibo; Ji, Li; Yu, Aibing
Circular concrete-encased concrete-filled steel tube (CFST) stub columns subjected to axial compression Magazine of Concrete Research
Vol. 68, Issue 19, pp. 995-1010
Li, Yong-Jin; Han, Lin-Hai; Xu, Wu; Tao, Zhong
A new model for bridge management. Part A, Condition assessment and priority ranking of bridges Australian Journal of Civil Engineering
Vol. 14, Issue 1, pp. 35-45
Rashidi, Maria; Samali, Bijan; Sharafi, Pezhman
A new model for bridge management. Part B, Decision support system for remediation planning Australian Journal of Civil Engineering
Vol. 14, Issue 1, 46-53
Rashidi, Maria; Samali, Bijan; Sharafi, Pezhman
Measurement system with accelerometer integrated RFID tag for infrastructure health monitoring IEEE Transactions on Instrumentation and Measurement
Vol. 65, Issue 5, No. 7366567, pp. 1163-1171
Jayawardana, Devaka; Kharkovsky, Sergey N.; Liyanapathirana, Ranjith; Zhu, Xinqun
Aerodynamic modification to a circular cylinder to enhance the piezoelectric wind energy harvesting Applied Physics Letters
Vol. 109, Issue 19, No. 193902
Hu, Gang; Tse, Kam-Tim; Kwok, Kenny C. S.; Song, Jie; Lyu, Yuan
Analytical assessment of CFRP retrofitted reinforced-concrete buildings subjected to near-fault ground motions Journal of Performance of Constructed Facilities
Vol. 30, Issue 6, No. 04016044
Eslami, Abolfazl A.; Ronagh, Hamid R.; Mostofinejad, Davood
Polycyclic aromatic hydrocarbons (PAHs) removal by sorption : a review Chemosphere
Vol. 148, pp. 336-353
Lamichhane, Shanti; KC, Bal Krishna; Sarukkalige, Ranjan
A compact high-gain and front-to-back ratio elliptically tapered antipodal Vivaldi antenna with trapezoid-shaped dielectric lens IEEE Antennas and Wireless Propagation Letters
Vol. 15, pp. 552-555
Moosa Zadeh, Mahdi; Kharkovsky, Sergey N.
Seismic performance of concrete-encased CFST piers : experimental study Journal of Bridge Engineering
Vol. 21, Issue 4, No. 04015072
Wang, Zhi-Bin; Han, Lin-Hai; Li, Wei; Tao, Zhong
Spectral-based damage identification in structures under ambient vibration Journal of Computing in Civil Engineering
Vol. 30, Issue 4, No. 04015062
Alamdari, Mehrisadat M.; Samali, Bijan; Li, Jianchun; Kalhori, Hamed; Mustapha, Samir
Fracture properties of CFRP-concrete bond subjected to three environmental conditions Journal of Composites for Construction
Vol. 20, Issue 4, No. 04016010
Kabir, Muhammad I.; Samali, Bijan; Shrestha, Rijun
Reliability analysis for load factors in steel bulk material handling structures with respect to AS4324.1 Australian Journal of Structural Engineering
Vol. 17, Issue 2, pp. 99-108
Kang, Won-Hee; Uy, Brian; Hawkes, Doug; Morgan, Richard
Probabilistic assessment of FRP-confined reinforced concrete columns Composite Structures
Vol. 153, pp. 851-865
Baji, Hassan; Ronagh, Hamid R.; Li, Chunqing
Reliability-based study on ductility measures of reinforced concrete beams in ACI 318 ACI Structural Journal
Vol. 113, Issue 2, pp. 373-382
Baji, Hassan; Ronagh, Hamid R.
Wireless power transmission in human tissue for nerve stimulation IET Microwaves, Antennas & Propagation
Vol. 10, Issue 6, pp. 670-675
Salama, Robert S.; Kharkovsky, Sergey N.; Liyanapathirana, Ranjith; Gunawardana, Upul
Frequency control of smart base isolation system employing a novel adaptive magneto-rheological elastomer base isolator Journal of Intelligent Material Systems and Structures
Vol. 27, Issue 7, pp. 849-858
Gu, Xiaoyu; Li, Jianchun; Li, Yancheng; Askari, Mohsen
Aerodynamic mechanisms of galloping of an inclined square cylinder Journal of Wind Engineering and Industrial Aerodynamics
Vol. 148, pp. 6-17
Hu, Gang; Tse, Kam-Tim; Kwok, Kenny C. S.
V2O5-C-SnO2 hybrid nanobelts as high performance anodes for lithium-ion batteries Scientific Reports
Vol. 6, No. 33597
Zhang, Linfei; Yang, Mingyang; Zhang, Shengliang; Wu, Zefei; Amini, Abbas; Zhang, Yi; Wang, Dongyong; Bao, Shuhan; Lu, Zhouguang;
Design strength evaluation of RC beams under radiation environments for nuclear power plants Nuclear Engineering and Design
Vol. 301, pp. 101-110
Kang, Won-Hee; Kwon, Tae-Hyun; Kim, Hyeong-Tae; Park, Kyoungsoo
The effect of interparticle cohesion on powder mixing in a ribbon mixer AlChE Journal
Vol. 62, Issue 4, pp. 1023-1037
Halidan, Musha; Chandratilleke, Ganga R.; Dong, Kejun; Yu, Aibing
Nanoscale anti-plane cracking of materials with consideration of bulk and surface piezoelectricity effects Acta Mechanica
Vol. 227, Issue 5, pp. 1445-1452
Nan, Haishun; Wang, Baolin
Statistical calibration of safety factors for flexural stiffness of composite columns Steel and Composite Structures
Vol. 20, Issue 1, pp. 127-145
Aslani, Farhad; Lloyd, Ryan; Uy, Brian; Kang, Won-Hee; Hicks, Stephen
Reliability-based flexural design models for concrete sandwich wall panels with continuous GFRP shear connectors Composites Part B: Engineering
Vol. 89, pp. 340-351
Author  Kang, Won-Hee; Kim, Junhee
A facile Friedel–Crafts acylation for the synthesis of polyethylenimine-grafted multi-walled carbon nanotubes as efficient gene delivery vectors International Journal of Pharmaceutics
Vol. 502, Issue 1-2, pp. 125-137
Hashem Nia, Azadeh; Amini, Abbas; Taghavi, Sahar; Eshghi, Hossein; Abnous, Khalil; Ramezani, Mohammad
Flexural behaviour of composite steel-concrete beams utilising blind bolt shear connectors Engineering Structures
Vol. 114, pp. 181-194
Pathirana, Sameera W.; Uy, Brian; Mirza, Olivia; Zhu, Xinqun
An experimental study into the capacity of cold-formed steel truss connections Journal of Constructional Steel Research
Vol. 127, pp. 176-186
Zeynalian, Mehran; Shelley, Adele; Ronagh, Hamid R.
Buckling analysis of laminated composite curved panels reinforced with linear and non-linear distribution of shape memory alloys Thin-Walled Structures
Vol. 106, pp. 9-17
Hassanli, Sina; Samali, Bijan
Numerical simulation of vortex-induced vibration of two rigidly connected cylinders in side-by-side and tandem arrangements using RANS model Journal of Fluids Engineering
Vol. 138, Issue 2, No. 021102
Zhao, Ming; Murphy, Joshua M.; Kwok, Kenny C. S.
Stochastic extreme motion analysis of jack-up responses during wet towing Ocean Engineering
Vol. 111, pp. 56-66
Kang, Won-Hee; Zhang, Chunwei; Yu, Jianxing
Stress-strain model for ferritic stainless steels Journal of Materials in Civil Engineering
Vol. 28, Issue 2, No. 06015009
Tao, Zhong; Rasmussen, Kim
Correlation between microwave properties and compressive strength of engineered cementitious mortar Microwave and Optical Technology Letters
Vol. 58, Issue 11, pp. 2696-2699
Chung, Kwok L.; Song, Chuanwang; Li, Yansheng; Zhang, Chunwei
Quasi-universality in the packing of uniform spheres under gravity Granular Matter
Vol. 18, Issue 1, No. 6
An, Xizhong; Dong, Kejun; Yang, Runyu; Zou, Ruiping; Wang, Chuncheng; Yu, Aibing
A comparative study on local atomic configurations characterized by cluster-type-index method and Voronoi polyhedron method Computational Materials Science
Vol. 123, pp. 214-223
Wei, Yanding; Peng, Ping; Yan, Z. Z.; Kong, Lingti; Tian, Zean; Dong, Kejun; Liu, R. S.
Reliability of ductility requirements in concrete design codes Structural Safety
Vol. 62, pp. 76-87
Baji, Hassan; Ronagh, Hamid R.; Melchers, Robert E.
Evaluating contradictory relationship between floor rotation and torsional irregularity coefficient under varying orientations of ground motion Earthquake and Structures
Vol. 11, Issue 6, pp. 1027-1041
Zhang, Chunwei; Alam, Zeshan; Samali, Bijan
Probabilistic design models for ultimate strength and strain of FRP-confined concrete Journal of Composites for Construction
Vol. 20, Issue 6, No. 04016051
Baji, Hassan; Ronagh, Hamid R.; Li, Chunqing
Residual stresses in high strength steel welded box sections Journal of Constructional Steel Research
Vol. 116, issue 1, No. 4323, pp. 55-64
Khan, Mahbub; Paradowska, Anna; Uy, Brian; Mashiri, Fidelis R.; Tao,
Load capacity prediction of in-service timber utility poles considering wind load Journal of Civil Structural Health Monitoring
Vol. 6, Issue 3, pp. 385-394
Yu, Yang; Li, Jianchun; Yan, Ning; Dackermann, Ulrike; Samali, Bijan
Temperature and electric potential fields of an interface crack in a layered thermoelectric or metal/thermoelectric material International Journal of Thermal Sciences
Vol. 104, pp. 396-403
Zhang, Aibing; Wang, Baolin
Experimental behaviour of concrete-filled steel tubular members under lateral shear loads Journal of Constructional Steel Research
Vol. 122, pp. 226-237
Ye, Yong; Han, Lin-Hai; Tao, Zhong; Guo, Shu-Li
Effect of different types of aggregates on the performance of concrete-filled steel tubular stub columns Materials and Structures
Vol. 49, Issue 9, pp. 3591-3605
Yu, Xin; Tao, Zhong; Song, Tian-Yi
Evaluation of the effect of smart facade systems in reducing dynamic response of structures subjected to seismic loads Earthquake and Structures
Vol. 11, Issue 6, pp. 983-1000
Samali, Bijan; Abtahi, Pooya
Application of Kalman filtering methods to online real-time structural identification : a comparison study International Journal of Structural Stability and Dynamics
Vol. 16, No. 1550016
Askari, Mohsen; Li, Jianchun; Samali, Bijan
The costs and benefits of combining recycled aggregate with steel fibres as a sustainable, structural material Journal of Cleaner Production
Vol. 112, Issue 4, pp. 2318-2327
Senaratne, Sepani; Gerace, Domenic; Mirza, Olivia; Tam, Vivian W. Y.; Kang, Won-Hee
Skin sympathetic nerve activity is modulated during slow sinusoidal linear displacements in supine humans Frontiers in Neuroscience
Vol. 10, No. 39
Bolton, Philip S.; Hammam, Elie; Kwok, Kenny C. S.; Macefield, Vaughan G.
Microstructure and properties of lightweight fibrous porous mullite ceramics prepared by vacuum squeeze moulding technique Ceramics International
Vol. 42, Issue 13, pp. 14843-14848
Zhang, Rubing; Ye, Changshou; Hou, Xiaobo; Li, Shaohua; Wang, Baolin
Performance of steel-reinforced concrete beam-to-column joints after exposure to fire Journal of Structural Engineering
Vol. 142, Issue 10
Song, Tian-Yi; Han, Lin-Hai; Tao, Zhong
A novel silica aerogel/porous Y2SiO5 ceramics with low thermal conductivity and enhanced mechanical properties prepared by freeze casting and impregnation Materials Letters
Vol. 175, pp. 219-222
Zhang, Rubing; Qu, Qiang; Han, Bingyu; Wang, Baolin
Thermal shock fracture mechanics of a cracked solid based on the dual-phase-lag heat conduction theory considering inertia effect Theoretical and Applied Fracture Mechanics
Vol. 86, pt B, pp. 309-316
Guo, Songlin; Wang, Baolin; Zhang, Chunwei
Techno economic analysis of electronic waste processing through black copper smelting route Journal of Cleaner Production
Vol. 126, pp. 178-190
Ghodrat, Maryam; Rhamdhani, Muhammad A.; Brooks, Geoffrey; Masood, Syed; Corder, Glen
Performance prediction of a new integrated central cooling plant for energy efficiency and comfort enhancement Building Services Engineering Research & Technology
Vol. 37, issue 4, pp. 379-394
Vakiloroaya, Vahid; Samali, Bijan; Eager, David
Cracking and thermal shock resistance of a Bi₂ Te₃ based thermoelectric material Engineering Fracture Mechanics
Vol. 152, pp. 1-9
Wang, Baolin; Guo, Yibin; Zhang, Chunwei
Cyclic behaviour of novel blind bolted joints with different stiffening elements Thin-Walled Structures
Vol. 101, pp. 157-168
Wang, Zhibin; Tao, Zhong; Li, Deshan; Han, Lin-Hai
Behavior of concrete-encased CFST members under axial tension Journal of Structural Engineering
Vol. 142, Issue 2, No. 04015149
Han, Lin-Hai; Wang, Zhi-Bin; Xu, Wu; Tao, Zhong
Experimental and numerical evaluation of progressive collapse behavior in scaled RC beam-column subassemblage Shock and Vibration
Vol. 2016, No. 3748435
Ahmadi, Rasool; Rashidian, Omid; Abbasnia, Reza; Nav, Foad Mohajeri; Usefi, Nima
Theoretical resistance of RC frames under the column removal scenario considering high strain rates Journal of Performance of Constructed Facilities
Vol. 30, Issue 5, No. 04016025
Nav, Foad Mohajeri; Abbasnia, Reza; Rashidian, Omid; Usefi, Nima
Finite element analysis of RC elements in progressive collapse scenario Gradevinar
Vol. 68, Issue 12, pp. 1009-1022
Usefi, Nima; Nav, Foad Mohajeri; Abbasnia, Reza
A new method for progressive collapse analysis of RC frames Structural Engineering and Mechanics
Vol. 60, Issue 1, pp. 31-50
Abbasnia, Reza; Nav, Foad Mohajeri; Usefi, Nima; Rashidian, Omid